| |
Volume 47,Issue 2,2018 Table of Contents
材料科学 | | | Hot deformation behavior and processing maps ofAA7085 aluminum alloy | | | Yang Qunying,Liu Wenyi,Zhang Zhiqing,Huang Guangjie and Liu Xiaoyong | | | 2018,47(2):409-415 [Abstract(1834)] [View PDF] | | | | | Dynamic globularization behavior of O-phase lamellae in Ti-22Al-25Nb (at.%) alloy during deformation at elevated temperatures | | | lin peng,tang tingting,chi chengzhong,zhang shuzhi and zhang changjiang | | | 2018,47(2):416-422 [Abstract(1583)] [View PDF] | | | | | Influence of atomizing gas and cooling rate on solidification characterization of nickel-based superalloy powders | | | FANG Pengjun,XU Yi,LI Xinggang and CHEN Ya | | | 2018,47(2):423-430 [Abstract(1362)] [View PDF] | | | | | Computer simulation of surface cracks behavior in anhydrous chemical conversion coatings on magnesium alloy | | | Li Lijie,Fang Yongchao,CaiZhaobing,Cui Xiufang,Liu Erbao and Jin Guo | | | 2018,47(2):430-435 [Abstract(1382)] [View PDF] | | | | | Effect of process parameters andascorbic acid on the electrodeposition NiFeW alloys | | | Zhao Lili,Yu Jinku,Sun Hui,Wang Yuehua,Yu Meiqi,Luo Hongliang,Xu Zhefeng and Kazuhiro matsugi | | | 2018,47(2):435-441 [Abstract(1529)] [View PDF] | | | | | The Performance of Supported Au-Pd Alloy Nano Particles Catalyst for Base-free Synthesis of Imines by Self-coupling of Amine | | | Meilin Jia,Wulan Ao,Yongsheng Bao,Xiaowei Chen,Sagala Bao,Jiang Wang and Zhaorigetu Bao | | | 2018,47(2):442-446 [Abstract(1169)] [View PDF] | | | | | Influence of TiC content on microstructure and properties of W–30Cu/TiC composites | | | Jingbo Chen,Limei Huang,Laima Luo,Xiang Zan and Yucheng Wu | | | 2018,47(2):447-451 [Abstract(1303)] [View PDF] | | | | | Thermoelectric properties of Co-doped ZnO by incorporating organic nanoparticles | | | Zihua Wu,Huaqing Xie,Yuanyuan Wang,Jiaojiao Xing and Jianhui Mao | | | 2018,47(2):452-456 [Abstract(1388)] [View PDF] | | | | | Microstructure and mechanical properties of Al–Cu alloy with 0.6%Fe produced by ultrasonic vibration and applied pressure | | | Zhao Yuliang and zhang Weiwen | | | 2018,47(2):457-462 [Abstract(1255)] [View PDF] | | | | | Synthesis and microstructure evolution of FeWB based cermets during the vacuum sintering | | | Hongwei Yu,Jun Li,Cheng Li and Ying Liu | | | 2018,47(2):463-468 [Abstract(1308)] [View PDF] | | | | | The Effect of Y2O3 on the Microstructure and Properties of the Fe-Al-Si-B Cladding by Plasma Transferred Arc | | | Zhang Deku,Xue Haobo and Wang Kehong | | | 2018,47(2):469-473 [Abstract(1404)] [View PDF] | | | | | Bonding Characterization of 316L and Porous Stainless Steel Thin Pipes by Vacuum Brazing | | | Yaning Li,Xinting Kang,Jian Wang and Huiping Tang | | | 2018,47(2):474-478 [Abstract(1383)] [View PDF 497.47 K (1399)] | | | | | Nanoindentation study of Cu-based bulk metallic glasses | | | Jin-Hong Pi,Zhang-Zhong Wang,Xian-Cong He and Yun-Qiang Bai | | | 2018,47(2):479-484 [Abstract(1636)] [View PDF] | | | | | Hot Deformation Behavior and Processing Map of Mo-Nb Single Crystals | | | Zhang Wen,Gao Xuanqiao,Cheng Jun,Hu Zhongwu,Li Laiping,Zhao Bin and Zhang Pingxiang | | | 2018,47(2):485-490 [Abstract(1326)] [View PDF] | | | | | Transport Properties and Mechanisms Modulated by Doping Ratio of Ce in La1-xCexMnO3 Electronic-doped Films | | | Liwei Niu,Changle Chen,Jianyuan Wang and KeXin Jin | | | 2018,47(2):491-495 [Abstract(1352)] [View PDF] | | | | | Modeling the temperature-related two-stage creep aging of Al-Zn-Mg-Cu aluminum alloy | | | Xu Fushun,Tan Jia,ZHANGJIN and Deng Yunlai | | | 2018,47(2):496-502 [Abstract(1357)] [View PDF] | | | | | Enhancement mechanisms of aluyminum foam-filled metallic corrugated sandwich panels | | | Yan Leilei,Zhao Xue,Zhao Jingbo,Li Binchao,Zhang Qiancheng and Lu Tianjian | | | 2018,47(2):503-508 [Abstract(1738)] [View PDF] | | | | | Glass forming ability and mechanical properties in Ti-Cu-based bulk metallic glasses | | | Li Peiyou | | | 2018,47(2):509-514 [Abstract(1574)] [View PDF] | | | | | Studying on the Hydrogen Isotope Effect of Palladium by Mass-Spectrography | | | Liu Meng,Yang Jiangrong,Qin Cheng,Zhu Hongzhi and Wang Huan | | | 2018,47(2):515-520 [Abstract(1584)] [View PDF] | | | |
材料工艺 | | | Effect of Si content on the formation process and properties of PEO ceramic coating on the surface of Al-xSi alloy | | | Wang Ping,Zhou Liguo,Li Jianping,Guo Yongchun,Yang Zhong and Wang Jianli | | | 2018,47(2):521-529 [Abstract(1683)] [View PDF] | | | | | The investigation of influence factors on differential scanning calorimetry (DSC) analysis of a Ni-base superalloy: heating/cooling rate and sampling position | | | Zheng Liang,Xu Wenyong,Liu Na,Liu Yang,Li Zhou,Xiao Chengbo and Zhang Guoqing | | | 2018,47(2):530-537 [Abstract(1847)] [View PDF] | | | | | Bending Fatigue Life and Remanufacturing Benefit Evaluation of High Velocity Arc Spraying Remanufacturing Crankshaft | | | Tian Haoliang,Guo Mengqiu,Wang Changliang,Wei Shicheng,Liang xiubing and Xu Binshi | | | 2018,47(2):538-545 [Abstract(1245)] [View PDF] | | | | | Analysis of Capacitive Properties of Ti/Mn(0.8-x)SnxIr0.2O2 Electrodes | | | YI Zhaoyu,Cheng Zhijie,SHAO Yanqun,ZHU Junqiu and TANG Dian | | | 2018,47(2):546-552 [Abstract(1613)] [View PDF] | | | | | Plane strain compression behavior of 2195 Al-Li alloy by thermal simulation compression | | | Li Shiqing and Zhang Zhiqing | | | 2018,47(2):553-559 [Abstract(1803)] [View PDF] | | | | | Microstructural degradation during creep loading and improvement methods for a directional lamellar TiAl alloy prepared by conventional casting | | | Zhu Chunlei,Zhang Xiwen,Luo Chen,Li Sheng and Zhang Ji | | | 2018,47(2):560-566 [Abstract(1217)] [View PDF] | | | | | High Temperature Mechanical Properties of TC4 Titanium Alloy Honeycomb | | | shang lei,xue qic hao,yang da chun,zou guang ping and li yao | | | 2018,47(2):567-573 [Abstract(1343)] [View PDF] | | | | | Effect of electropulsing assisted cutting process for quenched GCr15 bearing steel | | | Zhang Shuo,Wang Haibo,Zhang Bing,Song Guolin,Wang Xinlong,Han Bin and Tang Guo-yi | | | 2018,47(2):574-580 [Abstract(1320)] [View PDF] | | | | | Effect of Zr on Microstructure and Properties of Cu - Cr Alloy | | | Tian Wei,Liu Yifang,Bi Liming and Sun Yue | | | 2018,47(2):581-587 [Abstract(1324)] [View PDF] | | | | | Study on friction and wear properties of thermal spraying composite coating at different temperatures | | | lihui | | | 2018,47(2):588-593 [Abstract(1250)] [View PDF] | | | | | Zhang Le, Shao Huiping, Zheng Hang, Ren Xiangyuan | | | Zhang Le,shao huiping,Zheng Hang and Ren Xiangyuan | | | 2018,47(2):594-599 [Abstract(1584)] [View PDF] | | | | | The doping of Mn2O3 induced improvement of catalytic performance for oxygen reduction of MnO | | | Wu Xiaoying,Huang Taizhong,Yu Jiemei,Wen Changlan and Chen Zhonghe | | | 2018,47(2):600-605 [Abstract(1397)] [View PDF] | | | | | Preparation of Ferromagnetic Soft Magnetic Material by Direct Inkjet Printing Process | | | Ren Xiangyuan,Shao Huiping,Zheng Hang and Zhang Le | | | 2018,47(2):606-611 [Abstract(1223)] [View PDF] | | | | | Preparation of Carbon/ Carbon coated Iron nano materials and Numerical analysis of Gaseous Detonation | | | Yan Honghao,Zhao Tiejun,Li Xiaojie and Wu Linsong | | | 2018,47(2):612-617 [Abstract(1113)] [View PDF] | | | | | Static and dynamic mechanical behaviors characterization of the oxidized TC4 | | | Qin Jianfeng,Ma Yong,Yao Xiaohong,Lin Naiming and Tang Bin | | | 2018,47(2):618-623 [Abstract(1242)] [View PDF] | | | | | Effect of Ultrasonic Vibration on Microstructure and Hardness of TC4 Titanium Alloy Laser welding joints | | | Liu Haodong,Hu Fangyou,Dai Jingtao,Cui Aiyong,Huang Fei and Li Hongbo | | | 2018,47(2):624-629 [Abstract(1267)] [View PDF] | | | | | Structure and performance of KH570/A171 modified silica sol film on zirconium hydride surface | | | Wu Ming,Chen Yang,Yan Guoqing,Peng Jiaqing,Sun Yupu and Wang Lijun | | | 2018,47(2):630-635 [Abstract(1305)] [View PDF] | | | | | Ni-Ti-O Nanotube Arrays Supported Nano-Ni(OH)2 Electrode for Electrocatalytic Oxidation of Methanol | | | Xie Yun-yun,Hou Guang-ya,Cao Hua-zhen,Tang Yi-ping,Wu Lian-kui and Zheng Guo-qu | | | 2018,47(2):636-641 [Abstract(1304)] [View PDF] | | | | | Solidification Characteristics and Micro-Segregation of Sub-Eutectiod U-Nb alloy | | | B. CHEN,X.J. ZHAO,K. LIU,S.J.CHEN and Z.H. WANG | | | 2018,47(2):642-646 [Abstract(1519)] [View PDF] | | | | | Preparation and characterization of titanium alloy protective coating and its application | | | liuhao,Chen Guangchao,Du Lingzhong,Lan Hao,Huang Chuanbing,Wang Binli,Zhang Huiying and Zhang Weigang | | | 2018,47(2):647-651 [Abstract(1825)] [View PDF] | | | | | Analysis of variable gauge rolling impact on the edge damage of AZ31 magnesium alloy sheets | | | Wei Jianchun,Huang Qingxue,Huang Zhiquan and Zhu Yanchun | | | 2018,47(2):652-656 [Abstract(1937)] [View PDF] | | | | | The deformation behavior of near-β Ti-5553 alloy under the impact of light gas gun | | | Dai Hua-xiang,Wang Lin,Xu Xin and Wang Ding | | | 2018,47(2):657-661 [Abstract(1827)] [View PDF] | | | | | Analysis on the formation and mechanical properties of the TC4 porous structures by selective laser melting | | | Li Junchao,Zang Yanyan and Wang Wei | | | 2018,47(2):662-666 [Abstract(1553)] [View PDF] | | | | | The influence of Cu fiber porous surface structure on boiling heat transfer | | | Zhi Hao,Tang Huiping,Zhu Jilei,Wang Jianzhong,Ao Qingbo,Ma Jun,Li Aijun and Xu Zhongguo | | | 2018,47(2):667-671 [Abstract(1454)] [View PDF] | | | | | The effects of doping additives on the wettability and contact resistance of AgSnO2 contact material | | | wang haitao,huo jiangtao,liu yahong and wang xingwei | | | 2018,47(2):672-676 [Abstract(1451)] [View PDF] | | | | | Microstructure and Mechanical Properties of Diffusion Bonded Joint of TC4 Alloy Using Zr Interlayer | | | Wang Dong,Cao Jian,Dai Xiangyu,Qi Junlei and Feng Jicai | | | 2018,47(2):677-681 [Abstract(1462)] [View PDF] | | | | | Interface structure of titanium billet surface and high temperature oxidation resistant aluminum-base coatings | | | Rong Ju,Wang Yuan,Li Ru-yan,YU Xiao-hua and Meng Kun | | | 2018,47(2):682-686 [Abstract(1228)] [View PDF] | | | | | Investigation of Purification in Alloy GH3625 throughVacuum Induction Remelting | | | Ding Yutian and Wang Wei | | | 2018,47(2):687-691 [Abstract(1301)] [View PDF] | | | | | Modification of activated carbon using different complexants and its effect on Pd/C catalyst for disproportionation of rosin | | | Yongkang Zeng,Zhaowen Wang,Lihui Zeng and Yuefeng Li | | | 2018,47(2):692-696 [Abstract(1318)] [View PDF] | | | | | Sound Absorption Characteristics and structure optimization of Gradient Fibrous Porous Materials | | | AO Qing-Bo,WANG Jian-zhong,LI Ai-jun,ZHI Hao,MA Jun,XU Zhong-guo and TANG Hui-ping | | | 2018,47(2):697-700 [Abstract(1735)] [View PDF] | | | | | Effect of Cr Element on the Forming Ability and Corrosion Properties of Fe-based Bulk Amorphous Alloys | | | Xiong bin,Li Xue,zheng jibo,Li Xining,Lu gonghao,Wang Zhenmin,Ju dongying and Makino Akihiro | | | 2018,47(2):701-704 [Abstract(1646)] [View PDF] | | | |
评述
|
