+高级检索
纳米复合银-金刚石电接触材料的制备及性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

TG146.4

基金项目:

国家自然科学基金(50071043),国家高技术研究发展计划(2001AA320714)资助


Preparation and Properties of Nano-composite of Ag-Diamond Contact Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用高能球磨及热压方法制备银-金刚石合金,研究了金刚石添加相对银基触头材料组织、性能的影响。结果表明,高能球磨法能使金刚石粒子均匀分布在银基体内部,真空热压后,银基体内部的金刚石粒子呈纳米态分布。热压块体的密度能达到理论密度的94%以上。金刚石粒子的含量不同导致合金密度和硬度的变化。

    Abstract:

    Ag/diamond contacts alloys with a nanoscaled microstructure of diamond particles was fabricated by high-energy ball milling, hot-pressing and sintering. Morphology and performance of the alloys were studied. The results show that the nanoscaled diamond particle dispersed inside Ag grains homogeneously. The morphological and crystal structure of diamond has no change after the prepare process. The density of hot-pressed block is more than 94% of the theory density. Different contents of diamond can lead to a hardness variant of the Ag/diamond alloy.

    参考文献
    相似文献
    引证文献
引用本文

蒋鹏 王亚平 丁秉钧.纳米复合银-金刚石电接触材料的制备及性能[J].稀有金属材料与工程,2004,33(5):555~557.[Jiang Peng, Wang Yaping, Ding Bingjun. Preparation and Properties of Nano-composite of Ag-Diamond Contact Alloys[J]. Rare Metal Materials and Engineering,2004,33(5):555~557.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2002-12-17
  • 录用日期:
  • 在线发布日期:
  • 出版日期: