+高级检索
纳米Mg—Ni合金吸/放氢过程的热力学性能研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

O561.4

基金项目:

中国工程物理研究院科技预研项目资助;致谢:本课题在实施过程中得到了北京有色金属研究院蒋利军、中国工程物理研究院陈长安、郎定木等的大力支持与帮助,在此一并感谢!


The Investigation of Thermodynamic Properties of Nanocrystalline Mg-Ni Alloy during Hydrogen Absorption and Desorption
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用机械合金化法制备了Mg-Ni合金粉末。用XRD及SEM等手段分析表征了球磨过程中的相和微观结构变化,测定了纳米Mg-Ni合金吸/放氢过程的热力学性能。结果表明,Mg-Ni合金粉末的尺寸在10nm-20nm之间;P-C等温线存在明显的坪曲线,坪宽较长。纳米Mg-Ni合金有较好的储氢性能,具有很好的工程应用价值。

    Abstract:

    The Mg-Ni alloy was prepared by mechanical alloying. XRD and TEM analysis were used to indentify the microstructure and the phase of the Mg-Ni composite during the milling process, the thermodynamic properties of nanocrystalline Mg-Ni alloy were measured The results show that the alloy powder can be prepared by mechanical alloying on the condition that the milling technological parameters were strictly controled, The particle sizes of the powder were between 10 nm and 20 nm. At P-C isotherms there existed good plateau curves with long-width plateau.The nanocrystalline Mg-Ni alloy had a hystersis effect during hydrogen absorption/desorption and the effect decreased with the increase of temperature. The nanocrystalline Mg-Ni alloy has satisfied properties of hydrogen storage and a promising value of engineering application.

    参考文献
    相似文献
    引证文献
引用本文

熊义富 敬文勇 张义涛.纳米Mg—Ni合金吸/放氢过程的热力学性能研究[J].稀有金属材料与工程,2007,36(1):138~140.[Xiong Yifu, Jing Wenyong, Zhang Yitao. The Investigation of Thermodynamic Properties of Nanocrystalline Mg-Ni Alloy during Hydrogen Absorption and Desorption[J]. Rare Metal Materials and Engineering,2007,36(1):138~140.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:
  • 最后修改日期:2005-12-18
  • 录用日期:
  • 在线发布日期:
  • 出版日期: