+高级检索
医用316L不锈钢支架表面沉积(Fe/Pd)n薄膜的研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家自然科学基金(30470486);中国博士后科学基金面上资助金(20070410383);中国博士后科学基金特别资助金(200801439)


Deposition of (Fe/Pd)n Film on Medical 316L Stainless Steel Stent Surface
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用真空电弧离子镀技术,在医用316L不锈钢支架上沉积近等原子比的(Fe/Pd)n多层膜。用X射线衍射、扫描电镜、电子能谱研究(Fe/Pd)n多层膜的晶体结构、形貌和成分,分析相的转变。用CTCC-1数字磁通磁场测量仪测量样品的磁性。结果表明:医用316L不锈钢支架表面磁性膜的最佳结构为“Pd/Fe/Pd”,经扩散热处理后,(Fe/Pd)n薄膜从fcc结构转变为fct结构,薄膜均匀、致密、结合强度良好,有效磁场强度可达5×10-4 T以上,有效磁性可维持6个月。

    Abstract:

    Near-equiatomic (Fe/Pd)n multilayer films were deposited on the surface of medical 316L stainless steel stents by vacuum arc ion plating technology. The crystal structure, morphology and component of (Fe/Pd)n multilayer films were studied by XRD, SEM, and electronic energy spectrum and the phase transformation was also analyzed. The magnetic performances of the samples were detected by CTCC-1 numeral magnetic flux and magnetic field measurement instrument. The results indicate that the optimum structure of superficial magnetic films on medical 316L steel stents is “Pd/Fe/Pd”. After diffusion heat treatment, (Fe/Pd)n films changed from face-center-cubic (fcc) structure to face-center-tetragonal (fct) structure. The film is uniform with high density and good bonding strength. At the same time, its effective magnetic strength is to up to 5×10-4 T for 6 months.

    参考文献
    相似文献
    引证文献
引用本文

胡 涛,李争显,麻西群,周 廉,介万奇,王海昌.医用316L不锈钢支架表面沉积(Fe/Pd)n薄膜的研究[J].稀有金属材料与工程,2009,38(8):1437~1440.[Hu Tao, Li Zhengxian, Ma Xiqun, Zhou Lian, Jie Wanqi, Wang Haichang. Deposition of (Fe/Pd)n Film on Medical 316L Stainless Steel Stent Surface[J]. Rare Metal Materials and Engineering,2009,38(8):1437~1440.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2008-07-30
  • 最后修改日期:2009-05-12
  • 录用日期:
  • 在线发布日期:
  • 出版日期: