+高级检索
高强塑性TiB2P/Al复合材料的制备与力学性能
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

新世纪优秀人才支持计划(NCET-07-0234);中国博士后科学基金(20060400813);黑龙江省博士后科学基金(LBH-Z05114)


Fabrication and Mechanical Property of High Strength-Plasticity TiB2P/Al Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用TiB2颗粒与铝粉混配的方法,获得利于成形的预制体,采用压力浸渗法制备体积分数为20%的TiB2P/6061Al复合材料,并采用10:1的挤压比对复合材料进行热挤压。利用扫描电镜(SEM)、透射电镜(TEM)和万能电子拉伸机对热挤压前后复合材料的微观组织及力学性能进行研究,发现经过该种方法制备的复合材料经热挤压后具有良好的室温拉伸力学性能,抗拉强度为447.5 MPa,弹性模量为121.8 GPa,延伸率可达7.95 %,显示出良好的强塑性配合,分析其强塑性来源于增强体与基体之间的良好界面结合、晶粒细化强化和沉淀强化

    Abstract:

    Based on the easily-formed preform made of the mixture of TiB2 particles and aluminum powder, 20% TiB2P/6061Al composites (volume fraction) were fabricated by pressure infiltration method; subsequently, the composites were hot extruded with 10:1 extrusion ratio. The microstructures and mechanical properties of the composites before and after hot extrusion were studied with SEM, TEM and a tensile machine. Results show that the composites after hot extrusion exhibit better tensile strength, such as the tensile strength of 447.5 MPa, elastic modulus of 121.8 GPa and large elongation of 7.95 %. The high strength-plasticity for the composites is attributed to the interfacial bonding strength and grain refining strengthening and precipitation strengthening

    参考文献
    相似文献
    引证文献
引用本文

姜龙涛,陈国钦,修子扬,范瑞君,武高辉,赫晓东.高强塑性TiB2P/Al复合材料的制备与力学性能[J].稀有金属材料与工程,2010,39(2):329~332.[Jiang Longtao, Chen Guoqin, Xiu Ziyang, Fan Ruijun, Wu Gaohui, He Xiaodong. Fabrication and Mechanical Property of High Strength-Plasticity TiB2P/Al Composites[J]. Rare Metal Materials and Engineering,2010,39(2):329~332.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-03-21
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: