+高级检索
TA15钛合金动态再结晶晶粒生长模型
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

江西省自然科学基金(2008GZC0041);江西省教育厅科技项目(GJJ08203)


Modeling of Grain Growth for Dynamic Recrystallization of TA15 Titanium Alloy
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    从理论上分析TA15钛合金动态再结晶晶粒生长驱动力,提出动态再结晶晶粒生长等效反驱动力的概念。基于动态再结晶晶粒生长驱动力,建立(描述动态再结晶晶粒尺寸演变)的晶粒生长速率模型及晶粒尺寸模型。以TA15钛合金动态再结晶晶粒尺寸实验测定数据为例,采用遗传算法(GA)优化尺寸模型参数。结果表明,模型计算结果与实验数据能够达到较好的吻合,平均误差为7.4%。

    Abstract:

    Driving forces of grain growth during dynamic recrystallization of TA15 titanium alloy were analyzed theoretically and the equivalent negative driving forces concept for dynamic recrystallization grain growth was also proposed. Based on driving forces of dynamic recrystallization grain growth, a grain growth rate model and a grain size model describing grain size evolution of TA15 titanium alloy during dynamic recrystallization were established. Taking the experimental data of dynamic recrystallization grain size of TA15 titanium alloy as an example, the size model parameters were optimized by genetic algorithm (GA). The calculated results of grains size were in good agreement with the experimental values, whose average error was 7.4%

    参考文献
    相似文献
    引证文献
引用本文

欧阳德来,鲁世强,崔 霞,吴 超,李 鑫. TA15钛合金动态再结晶晶粒生长模型[J].稀有金属材料与工程,2010,39(7):1162~1165.[Ouyang Delai, Lu Shiqiang, Cui Xia, Wu Chao, Li Xin. Modeling of Grain Growth for Dynamic Recrystallization of TA15 Titanium Alloy[J]. Rare Metal Materials and Engineering,2010,39(7):1162~1165.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-08-20
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: