+高级检索
高强钛合金抗拉强度的理论计算
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点基础研究发展规划(“973”计划)(2007CB613807,2007CB613805)


Theoretical Calculation for Tensile Strength of High Strength Titanium Alloys
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    利用高强钛合金相及相界面电子结构参数的统计值、结合制备工艺及相变,提出高强钛合金抗拉强度理论计算公式,即高强钛合金的抗拉强度应为基体b-Ti的强度与合金元素的固溶强化、界面强化(涵盖析出强化)产生的强化强度增量之和。以西北有色金属研究院设计的高强亚稳b钛合金Ti-B20的实验研究为基础,分别计算Ti-B20合金在b相区固溶处理、a+b相区固溶处理及780 ℃固溶+时效处理后的抗拉强度,计算结果与实验研究符合较好。

    Abstract:

    By means of the statistical data of valence electron structure parameters of metallic phase and phase interfaces combined with the preparation technology and phase transformation, the theoretical calculation formulae for the tensile strength of high strength titanium alloys were put forward, i.e., the tensile strength of high strength titanium alloys is the sum of strength of b-Ti and the strengthening strength increments caused by solid-solution strengthening and interface strengthening including precipitation strengthening of alloying element. Based on the experimental data of the high strength metastable b titanium alloy Ti-B20 developed by Northwest Institute for Nonferrous Metal Research, its tensile strength was calculated when it was treated by solid solution above b transus, below b transus and at 780 °C followed by aging, respectively. The calculation results agree well with the experimental results.

    参考文献
    相似文献
    引证文献
引用本文

林 成,尹桂丽,刘志林,赵永庆,吴 欢,葛 鹏.高强钛合金抗拉强度的理论计算[J].稀有金属材料与工程,2010,39(7):1189~1194.[Lin Cheng, Yin Guili, Liu Zhilin, Zhao Yongqing, Wu Huan, Ge Peng. Theoretical Calculation for Tensile Strength of High Strength Titanium Alloys[J]. Rare Metal Materials and Engineering,2010,39(7):1189~1194.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2009-06-19
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: