+高级检索
Gra./Cu和CNTs/Cu复合材料的截流值与阴极斑点研究
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:

国家重点基础研究发展计划“973”项目 (2007CB607603)


Chopping Current and Cathode Spot Movements of Gra./Cu and CNTs/Cu Composites
Author:
Affiliation:

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用粉末冶金方法制备石墨铜复合材料(Gra./Cu)和碳纳米管铜复合材料(CNTs/Cu),研究2种铜基复合材料的真空电弧截流现象和阴极斑点特性。结果表明,与Gra./Cu相比,CNTs/Cu在真空放电过程中电弧更加稳定,且分散性好,截流值小;在正对阳极处CNTs/Cu的真空电弧烧蚀坑明显比Gra./Cu的细小,灼痕直径约为0.1~5 μm,分布面积也较小,而Gra./Cu的灼痕直径为10~100 μm;两者的相同之处在于,在电击穿过程中阴极斑点的运动呈一种随机的、突变式的跳跃,而且选择性发生在Cu相上,Cu相被消耗。总之,CNTs/Cu比Gra./Cu具有更高的耐电弧烧蚀能力,CNTs的加入可以有效地增加铜基复合材料的电弧稳定性和降低截流值

    Abstract:

    Gra./Cu composites and CNTs/Cu composites were prepared by powder metallurgy. Chopping current and cathode spot movements of the 2 kinds of Cu matrix composites in vacuum were investigated. The results show that the vacuum arc of CNTs/Cu is more stable and dispersive, and the chopping current is less than that of Gra./Cu. For CNTs/Cu the size of cathode spot craters is 0.1-5 μm in diameter, while for Gra./Cu is between 10 and 100 μm. The common characteristics are that cathode spot initiates selectively on the Cu phases and walks randomly on the surface of the Cu matrix composites. It is concluded that CNTs/Cu has an higher arc erosion resistance than Gra./Cu, and CNTs can effectively increase stability and lower chopping current of the Cu matrix composites.

    参考文献
    相似文献
    引证文献
引用本文

许 玮,胡 锐,刘懿文,李金山,傅恒志. Gra./Cu和CNTs/Cu复合材料的截流值与阴极斑点研究[J].稀有金属材料与工程,2011,40(9):1616~1620.[Xu Wei, Xu Wei, Liu Yiwen, Li Jinshan, Fu Hengzhi. Chopping Current and Cathode Spot Movements of Gra./Cu and CNTs/Cu Composites[J]. Rare Metal Materials and Engineering,2011,40(9):1616~1620.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2010-09-18
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: