+高级检索
Effect of Technical Parameters on Surface Morphology of Electrodeposition of Iridium Layer in Aqueous System
DOI:
作者:
作者单位:

作者简介:

通讯作者:

中图分类号:

基金项目:


Effect of Technical Parameters on Surface Morphology of Electrodeposition of Iridium Layer in Aqueous System
Author:
Affiliation:

Fund Project:

NSFC(51071014); ASFC(2010ZE51055)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    在水体系中利用直流电沉积的方法以IrCl3为主盐在铂基体上制备出了Ir层。利用SEM、EDS和XPS对不同工艺参数下所制备Ir层的表面形貌及成分进行了分析,并最终获得了最优的电沉积工艺条件。结果表明:IrCl3主盐浓度对Ir层形貌有较大影响,浓度太低时电沉积的铱层太薄,导致铱层易起皮或产生裂纹,故适当提高主盐的浓度有利于改善Ir层质量;在一定的pH值范围内,电沉积所制备的Ir层表面形貌差别不大,表面均比较平整,Ir颗粒比较均匀、致密;电流密度对Ir层表面形貌尤其是对Ir层结晶颗粒的大小和致密性影响较大;电沉积溶液的温度太低时,不能沉积出Ir层,温度太高时,则沉积出的Ir层粗糙、表面形貌不均匀。

    Abstract:

    Iridium layer was prepared on platinum substrate under constant current in aqueous system using anhydrous iridium chloride as precursors. The surface morphology and the composition of the iridium layer were characterized by SEM, EDS and XPS. The optimized condition was derived. The results show that the concentration of iridium chloride has great influence on the surface morphology of the iridium layer. When the concentration is low, too thin iridium layer is formed, resulting in peeling or cracking. Therefore, an appropriate increase in the concentration of the precursors will help to improve the quality of the Ir layer. In a certain range of pH values, the surface morphologies of the iridium layers prepared on different conditions are nearly the same. The surface is smooth and iridium particles are uniform and dense. Current density has great influence on the surface morphology of the iridium layer, especially on the size and the density of crystalline particle. The iridium layer cannot be deposited at low solution temperature. Whereas the iridium layer is rough and its surface morphology is uneven at too high temperature.

    参考文献
    相似文献
    引证文献
引用本文

钱建刚,肖世明,赵 天,栾海静. Effect of Technical Parameters on Surface Morphology of Electrodeposition of Iridium Layer in Aqueous System[J].稀有金属材料与工程,2012,41(7):1139~1143.[Qian Jiangang, Xiao Shiming, Zhao Tian, Luan Haijing. Effect of Technical Parameters on Surface Morphology of Electrodeposition of Iridium Layer in Aqueous System[J]. Rare Metal Materials and Engineering,2012,41(7):1139~1143.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2011-07-29
  • 最后修改日期:
  • 录用日期:
  • 在线发布日期:
  • 出版日期: