+高级检索
W粉末的形貌结构对板状晶硬质合金的组织与性能的影响
DOI:
作者:
作者单位:

南昌大学材料科学与工程学院;南昌硬质合金有限责任公司;,南昌大学材料科学与工程学院,南昌 330031

作者简介:

通讯作者:

中图分类号:

TF122

基金项目:

国家自然科学基金项目(面上项目,重点项目,重大项目);国家教育部博士点基金


Effects of Morphology Structures of Tungsten powders on the Properties and Microstructures of Plate-like Grain Cemented Carbi
Author:
Affiliation:

Nanchang Cemented Carbide Co., Ltd.,School of Materials Science and Engineering, Nanchang University

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用W Co C(碳黑)为原料制备板状晶硬质合金,研究了不同形貌结构的氧化钨所制备的W粉末形貌结构对板状晶硬质合金组织、性能的影响。结果表明,不同于蓝钨制备的高温中颗粒W粉呈类球状或斜方十二面体结构,黄钨制备的W粉末颗粒呈多面体等轴状,更易于通过球磨获取扁平化程度高的W粉末,制备出板晶化程度高,板状晶的长、径比大,晶粒的取向性好的板状晶硬质合金。

    Abstract:

    The plate-like grain cemented carbides were prepared using W Co C (carbon black) as the raw materials. Effects of the morphologies of tungsten powders prepared by different raw materials on the flattening morphologies of W powders and the microstructures and properties of plate-like grain cemented carbides were researched. It showed that the morphologies of W powders prepared by blue tungsten oxides (BTO) were spherical polyhedron. However, the W powders prepared by yellow tungsten oxides (YTO) were polyhedral equiaxial, which were easier access to prepare plate-like tungsten powders by ball milling, and prepare plate-like grain WC-Co cemented carbides.

    参考文献
    相似文献
    引证文献
引用本文

雷纯鹏,唐建成. W粉末的形貌结构对板状晶硬质合金的组织与性能的影响[J].稀有金属材料与工程,2016,45(8):2146~2149.[leichunpeng, Tang Jiancheng. Effects of Morphology Structures of Tungsten powders on the Properties and Microstructures of Plate-like Grain Cemented Carbi[J]. Rare Metal Materials and Engineering,2016,45(8):2146~2149.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-07-02
  • 最后修改日期:2014-07-25
  • 录用日期:2014-10-30
  • 在线发布日期: 2016-10-09
  • 出版日期: