+高级检索
TC4合金表面渗钼层在模拟油田介质中的耐蚀性
DOI:
作者:
作者单位:

太原理工大学表面工程研究所

作者简介:

通讯作者:

中图分类号:

TG174

基金项目:

中国博士后科学基金(2012M520604);山西省青年科技基金(2013021013-2);太原理工大学青年基金(2013T011)


Corrosion Resistance of Molybdenizing Coating on TC4 Alloy in Simulated Oilfield Medium
Author:
Affiliation:

Taiyuan University of Technology

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用等离子表面合金化技术对TC4合金进行渗钼表面改性,使用光学显微镜,辉光光谱分析仪和X射线衍射仪分析渗钼层的特征,借助电化学测试技术评价TC4合金和渗钼层在模拟油田介质中的耐蚀性。结果表明:渗钼层均匀、连续,渗层由钼的沉积层和扩散层组成;渗钼层的耐蚀性略低于TC4合金。

    Abstract:

    Plasma surface alloying process was employed to prepare molybdenizing coating on TC4 alloy. Microstructural characteristics of the molybdenizing coating were analyzed using optical microscope (OM), glow discharge optical emission spectrometer analysis (GDOES) and X-ray diffraction (XRD). Corrosion resistance of molybdenizing coating and TC4 alloy in simulated oilfield medium were estimatted via electrochemical measurements. The results revealed that the uniform and continuous molybdenizing coating was composed of a deposition layer and a diffusion layer. The molybdenizing coating presented slightly lower corrosion resistance as compared with TC4 alloy.

    参考文献
    相似文献
    引证文献
引用本文

林乃明. TC4合金表面渗钼层在模拟油田介质中的耐蚀性[J].稀有金属材料与工程,2016,45(12):3233~3237.[LIN Naiming. Corrosion Resistance of Molybdenizing Coating on TC4 Alloy in Simulated Oilfield Medium[J]. Rare Metal Materials and Engineering,2016,45(12):3233~3237.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2014-09-22
  • 最后修改日期:2014-11-04
  • 录用日期:2014-12-03
  • 在线发布日期: 2017-02-06
  • 出版日期: