+高级检索
非晶制带冷却辊热流与温度场数值模拟
作者:
作者单位:

北京航空航天大学 机械工程与自动化学院,北京航空航天大学 机械工程与自动化学院,北京航空航天大学 机械工程与自动化学院


Cooling Roller Steady-state Temperature and Heat Flux Analysis in Amorphous preparing
  • 摘要
  • | |
  • 访问统计
  • |
  • 参考文献 [13]
  • |
  • 相似文献 [20]
  • | | |
  • 文章评论
    摘要:

    冷却辊温度是影响非晶带材质量的关键因素, 为此应用流体动力学软件FLUENT模拟了冷却辊外壁面沿圆周方向的热流分布,以此为边界条件,采用有限元分析法对冷却辊进行了稳态温度场分析,获得了冷却辊内外壁温度场分布,讨论了冷却辊辊厚和冷却水通道高度对冷却辊温度场的影响规律。结果表明:减小冷却辊厚度可降低冷却辊外表面温度,提高内表面温度;减小冷却水通道高度可以降低冷却辊内外表面温度。通过综合分析,得到冷却辊内外表面温度在一定范围内的最优化设计方案,为非晶带材冷却辊的设计及优化提供理论支持。

    Abstract:

    Temperature of cooling roller is a key issue affecting the quality of the amorphous ribbon. To this end, heat flux distribution acting on cooling roller outer wall calculated by fluid dynamics software Fluent, cooling roller steady temperature field analyzed with Finite Element Method by heat flux boundary conditions, obtained the cooling roller inner and outer wall temperature distribution, and discussed the temperature of cooling roller as cooling roller thickness and water passage height. The results show that cooling roller outer wall temperature decreases with roller thickness and the cooling water passage height decreased; Cooling roller inner wall temperature decreases with roller thickness increased and the cooling water passage height decreased. Meantime, the appropriate roller thickness and passage height selected to keep cooling roller both inner and outer wall temperature within the certain range. The study result provided theoretical support for cooling roller design and optimization.

    参考文献
    1Song Y M, Yang Y..Journal of Beijing University of Aeronautics and Astronautics[J],2015,41 (3):472 (in Chinese).
    2Narasimhan M C, United States Patent, No.4142571(1979)
    3Willy HJ, Zhao LZ, Wang G, et.al.Physics B[J],2014(437):17
    4Srinivas M, Majumdar B, Phani Kumar G, et.al. INT J Metal Mater Trans B[J], 42(2011): 370.
    5M Sowjanya, T. Kishen Kumar Reddy. Journal of Materials Processing Technology[J],, 2010, 30(1): 34.
    6Song Y M, Yang Y. Materials and Manufacturing Processes[J], 30:5, 631.
    7Pang Yunzhou, Shen Chuanlu, MaHongliang et al. Journal of shanghai iron and Steel Research[J],1982,3:42.
    8Guo Xi, Yan Mi. Rare Metal Materials and Engineering[J], 2015,44(8):2048.
    9Liu Feng, Zhang Jinyua, Zhang Ke, et al. Journal of Xi’an Technological University[J], 2010, 30(1): 34.
    10Zhang Na, Experimental Study on Forced Convection Heat Transfer in Concentric Annular Channels[D], Qingdao: China University of Petroleum,2010.
    11Liu H, Chen W, Qiu S, et al. Metallurgical and Materials Transactions B[J], 2009, 40(3): 411.
    12Zhang Jiongming, Zhang Li, Wang Xin-hua, et al. ACTA Metallurgical sinica[J], 2003, (12): 1285.
    13Thdisen E A, Davis M J, Weinstein S J, and Steen P H, Chem EngSci[J], 64(2010):3249
    引证文献
    网友评论
    网友评论
    分享到微博
    发 布
引用本文

李永康,宋言明,杨洋.非晶制带冷却辊热流与温度场数值模拟[J].稀有金属材料与工程,2017,46(4):917~922.[liyongkang, song yan ming, yang yang. Cooling Roller Steady-state Temperature and Heat Flux Analysis in Amorphous preparing[J]. Rare Metal Materials and Engineering,2017,46(4):917~922.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2016-06-17
  • 最后修改日期:2016-11-01
  • 录用日期:2016-11-11
  • 在线发布日期: 2017-08-04