+高级检索
离心真空吸铸成形叶轮件凝固组织与性能研究
DOI:
作者:
作者单位:

西北工业大学凝固技术国家重点实验室,西安科技大学材料学院,西北工业大学凝固技术国家重点实验室

作者简介:

通讯作者:

中图分类号:

TG249

基金项目:

国家自然科学基金资助(51375391);中央高校基本科研业务费专项资金资助(3102014KYJD036)


Investigation on solidification microstructure and properties of aluminum alloy impeller produced by centrifugal counter-gravity casting
Author:
Affiliation:

State Key Laboratory of Solidification Processing,Northwestern Polytechnical Uinversity,Xi’an,College of Materials Science and Engineering,Xi’an University of Science and Technology,Xi’an,State Key Laboratory of Solidification Processing,Northwestern Polytechnical Uinversity,Xi’an

Fund Project:

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    本文采用真空吸铸及离心真空吸铸工艺生产了铝合金叶轮铸件,并研究了不同工艺对铸件凝固组织与力学性能的影响。结果表明,与真空吸铸相比,离心真空吸铸有利于提高金属液的充型流动和凝固补缩能力,获得完整的铸件;真空吸铸时施加离心旋转,可在铸件凝固期间促进枝晶的断裂和游离,抑制枝晶的生长,减小二次枝晶间距并使枝晶尺寸具有较好的均匀性,所获得铸件具有良好的力学性能。

    Abstract:

    Solidification microstructure and properties of aluminum alloy impeller produced by centrifugal counter-gravity casting has been investigated. For comparison, vacuum suction casting has also been used. Applying centrifugal force during centrifugal counter-gravity casting was found to have a significant effect on α-Al dendrites, which was fragmented into smaller spherical particles. Furthermore, applying centrifugal force at the early stage of centrifugal counter-gravity casting also improves the filling and feeding capacity during solidification and thereby reduces the formation of defects such as shrinkage porosity and shrinkage cavity. This investigation demonstrates that centrifugal counter-gravity casting is very promising to produce high quality complex thin-walled castings.

    参考文献
    相似文献
    引证文献
引用本文

李新雷,夏瑾,郝启堂.离心真空吸铸成形叶轮件凝固组织与性能研究[J].稀有金属材料与工程,2018,47(4):1319~1324.[Li Xinlei, Xia Jin, Hao Qitang. Investigation on solidification microstructure and properties of aluminum alloy impeller produced by centrifugal counter-gravity casting[J]. Rare Metal Materials and Engineering,2018,47(4):1319~1324.]
DOI:[doi]

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2017-12-19
  • 最后修改日期:2018-01-29
  • 录用日期:2018-02-23
  • 在线发布日期: 2018-05-31
  • 出版日期: