+高级检索
涂覆载量对IrO2-CeO2-G/Ti电极组织结构和电容性能的影响
作者:
作者单位:

福州大学 材料科学与工程学院

作者简介:

通讯作者:

中图分类号:

基金项目:

the National Natural Science Foundation of China (21875038)


Effect of IrO2 Content on Microstructure and Capacitance of IrO2-CeO2-G/Ti Electrode
Author:
Affiliation:

1.College of Materials Science and Engineering,Fuzhou University,Fuzhou,350108;2.China

Fund Project:

The National Natural Science Foundation of China (21875038)

  • 摘要
  • |
  • 图/表
  • |
  • 访问统计
  • |
  • 参考文献
  • |
  • 相似文献
  • |
  • 引证文献
  • |
  • 资源附件
  • |
  • 文章评论
    摘要:

    采用热分解法制备了新型IrO2-CeO2-G/Ti复合电极。采用SEM、TEM、XRD和XPS等测试手段分别对不同IrO2含量的电极进行表征。采用循环伏安法、恒流充放电法和电化学阻抗谱法对电极的电化学行为进行研究。结果表明,IrO2涂覆载量为2.5mg/cm2 的电极具有最大的比电容值459.5 F/g。在5mA/cm2电流密度下,经5000次充放电循环后IrO2涂覆载量为2.5mg/cm2电极比电容仍能保持97.8%。该种复合电极材料因其独特的元素组成和良好的赝电容性能,是一种理想的超级电容器电极材料。

    Abstract:

    The novel IrO2-CeO2-G/Ti composite electrodes were prepared by thermal decomposition method. The synthesized electrodes with different IrO2 content had been characterized by scanning electron microscope(SEM), transmission electron microscope(TEM), X-ray diffraction(XRD) and X-ray photoelectron spectroscopy(XPS). The electrochemical performances of the electrodes were investigated by cyclic voltammetry, galvanostatic charge–discharge and electrochemical impedance spectroscopy in 0.5 M H2SO4 solution. The results showed that the electrode with 2.5mg/cm2 IrO2 exhibited an excellent specific capacitance value of 459.5 F/g, and the specific capacitance maintained about 97.8% after 5000 charge-discharge cycles at a 5mA/cm2 current density. The electrode with 2.5mg/cm2 IrO2 was an ideal electrode for supercapacitor due to?its unique composition proportion and the excellent pseudocapacitance property.

    参考文献
    相似文献
    引证文献
引用本文

黄善锋,冯珂珂,王艳鸿,张 帅,邵艳群,陈孔发,唐 电.涂覆载量对IrO2-CeO2-G/Ti电极组织结构和电容性能的影响[J].稀有金属材料与工程,2020,49(5):1533~1538.[Shanfeng HUANG, Keke FENG, Yanhong WANG, Shuai ZHANG, Yanqun SHAO, Kongfa CHEN, Dian TANG. Effect of IrO2 Content on Microstructure and Capacitance of IrO2-CeO2-G/Ti Electrode[J]. Rare Metal Materials and Engineering,2020,49(5):1533~1538.]
DOI:10.12442/j. issn.1002-185X.20181261

复制
文章指标
  • 点击次数:
  • 下载次数:
  • HTML阅读次数:
  • 引用次数:
历史
  • 收稿日期:2018-12-18
  • 最后修改日期:2019-01-03
  • 录用日期:2019-01-09
  • 在线发布日期: 2020-06-05
  • 出版日期: