+Advanced Search
Home > Archive>Volume 46, Issue 8, 2017 >2208-2213
PDF HTML XML Export Cite reminder
Effects of Electropulsing on Crack Tip in Remanufacturing Blank
Author:
Affiliation:

School of Materials Science and Technology,Dalian University of Technology,School of Materials Science and Technology,Dalian University of Technology,School of Materials Science and Technology,Dalian University of Technology,School of Mechanical Engineering,Dalian University of Technology,Shenyang Blower Works Group Corporation,Department of Mechanical Engineering Tsinghua University,School of Mechanical Engineering,Dalian University of Technology

  • Article
    • | |
  • Metrics
    • |
  • Reference [17]
    • |
  • Related [20]
    • | | |
  • Comments
    Abstract:

    Crack can constantly expand and then cause invalidation, even cause catastrophic damage under the reciprocating loading. Based on remanufacturing, high energy pulse current impacting device was used to treat 316 austenitic stainless steel containing prefabricated unilateral fatigue crack. The influence of high density pulse electric current on the microstructure at crack tip was investigated by means of metallographic microscope, X-ray diffraction, electron backscattered diffraction (EBSD) and transmission electron microscope (TEM). And the evolution of microstructure by melting treatment was analysized. Results show that the sturture at crack tip obviously became refinement after the pulse current processing, and the gradient structure including the columnar crystal area, recrystallization zone and matrix was observed. Due to the rapid heating and cooling, the generation of high-speed electronic wind, electrically induced plasticity effect, the thermodynamic barrier of recrystallization or phase change was reduced by pulsed current treatment. The rate of nucleation was increased, inhibiting the grain growth process. Therefore the grain size of recrystallization zone was smaller than that of the matix, and hence the mechanical properties of materials was improved.

    Reference
    [1] Song P S, Sheu B C, Chou H H. Deposition of plating metals to improve crack growth life [J]. International Journal of Fatigue, 2001, 23(3): 259-270.
    [2] 王刚, 张秉刚, 冯吉才, 等. 镍基高温合金叶片焊接修复技术的研究进展 [J]. 焊接, 2008, 01): 20-23.
    [3] Buxbaum O, Huth H. Expansion of cracked fastener holes as a measure for extension of lifetime to repair [J]. Engineering Fracture Mechanics, 1987, 28(5-6): 689-698.
    [4] Goto M, Miyagawa H, Nisitani H. Crack growth arresting property of a hole and Brinell-type dimple [J]. Fatigue Fracture of Engineering Materials Structures, 1996, 19(1): 39-49.
    [5] Murdani A, Makabe C, Saimoto A, et al. A crack-growth arresting technique in aluminum alloy [J]. Engineering Failure Analysis, 2008, 15(4): 302-310.
    [6] Conrad H. Influence of an electric or magnetic field on the liquid–solid transformation in materials and on the microstructure of the solid [J]. Materials Science and Engineering: A, 2000, 287(2): 205-212.
    [7] Conrad H, Karam N, Mannan S. Effect of prior cold work on the influence of electric current pulses on the recrystallization of copper [J]. Scripta metallurgica, 1984, 18(3): 275-280.
    [8] Conrad H, Sprecher Jr A, Cao W, et al. Electroplasticity—the effect of electricity on the mechanical properties of metals [J]. JoM, 1990, 42(9): 28-33.
    [9] 白象忠, 胡宇达, 谭文锋. 电磁热效应裂纹止裂研究的进展 [J]. 力学进展, 2000, 04): 546-557.
    [10] Song H, Wang Z-J. Microcrack healing and local recrystallization in pre-deformed sheet by high density electropulsing [J]. Materials Science and Engineering a-Structural Materials Properties Microstructure and Processing, 2008, 490(1-2): 1-6.
    [11] 王钧石. P50钢轨钢的奥氏体晶粒度对其门槛值和裂纹扩展速率的影响 [J]. 机械工程材料, 1993, (05): 12-13.
    [12] Knobbe H, Koester P, Christ H-J, et al. Initiation and Propagation of Short Fatigue Cracks in Forged Ti6Al4V [J]. Fatigue 2010, 2010, 2(1): 931-940.
    [13] Long M, Crooks R, Rack H J. High-cycle fatigue performance of solution-treated metastable-beta titanium alloys [J]. Acta Materialia, 1999, 47(2): 661-669.
    [14] Zhu R F, Tang G Y, Shi S Q, et al. Microstructure evolution of copper strips with gradient temperature in electropulsing treatment [J]. Journal of Alloys and Compounds, 2013, 58(1)160-165.
    [15] 肖素红, 郭敬东, 吴世丁, 等. 电脉冲处理下疲劳铜单晶的再结晶 [J]. 金属学报, 2002, 02): 161-165.
    [16] 吕宝臣, 周亦胄, 王宝全, 等. 脉冲电流对疲劳后30CrMnSiA钢组织结构的影响 [J]. 材料研究学报, 2003, (01): 15-18.
    [17] Hosoi A, Kishi T, Ju Y. Healing of Fatigue Crack by High-Density Electropulsing in Austenitic Stainless Steel Treated with the Surface-Activated Pre-Coating [J]. Materials, 2013, 6(9): 4213-4225.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

[DENG Dewei, LIU Qianqian, LI Xiaona, YU Tao, ZHANG Lin, WANG Gang, ZHANG Hongchao. Effects of Electropulsing on Crack Tip in Remanufacturing Blank[J]. Rare Metal Materials and Engineering,2017,46(8):2208~2213.]
DOI：[doi]

Copy
Article Metrics
  • Abstract:1249
  • PDF: 1193
  • HTML: 158
  • Cited by: 0
History
  • Received:April 28,2015
  • Revised:May 29,2015
  • Adopted:August 11,2015
  • Online: November 16,2017

Total visitors：12687102

Address：96 weiyanglu, xi'an,Shaanxi, P.R.China Postcode：710016 ServiceTel：0086-26-86231117

E-mail：rmme@c-nin.com

Copyright:Rare Metal Materials and Engineering ® 2025 All Rights Reserved Support:Beijing E-Tiller Technology Development Co., Ltd. ICP: