+Advanced Search
Temperature Sensitivity of Fatigue Crack Growth Rate for GH4720Li Alloy
Author:
Affiliation:

School of Materials Science and Engineering,University of Science and Technology Beijing,School of Materials Science and Engineering,University of Science and Technology Beijing,School of Materials Science and Engineering,University of Science and Technology Beijing,School of Materials Science and Engineering,University of Science and Technology Beijing,School of Materials Science and Engineering,University of Science and Technology Beijing,High Temperature Materials Research Institute,Central and Steel Research Institute

  • Article
  • | |
  • Metrics
  • |
  • Reference [14]
  • |
  • Related [20]
  • | | |
  • Comments
    Abstract:

    The fatigue crack growth rate of difficult-to-deform superalloy GH4720Li are investigated at 650℃, 700℃, 750℃and 800℃. The analysis of temperature effect on fatigue crack growth rate under pure fatigue and fatigue with 90s dwell. The result shows that the fatigue crack growth rate(FCGR) and increasing rate increased as the temperature increased. FCGR increase rapidly at 800℃. Temperature changes the model of the fatigue crack propagation, the fracture mode is the mix of transgranular and intergranular at 650℃, the fracture mode is predominantly inergranular at 700~800℃. The crack growth rate increased significantly with increasing the holding time. The higher test temperature is, the greater effect of dwell time on crack growth rate.

    Reference
    [1] D.J. Bryant and G. McIntosh. Superalloys 1996 [C], 1996:713.
    [2] Jackson M P, Reed R C. MaterSci Eng A[J], 1999, 259(1):85
    [3] Couturier R, Burlet H, Terzi S, et al. Superalloys 2004[C], 2004:351
    [4] Koizumi Y, Kobayashi T, Yokokawa T et al. Superalloys2004[C], 2004:35
    [5] H.T. Pang, P.A.S Reed. Fatigue Fract Eng Mater Struct[J], 2009, 32: 685
    [6] Yu Qiuying(于秋颖), Zhang Maicang(张麦仓), Dong Jianxin(董建新). Journal of University of Science and Technology Beijing(北京科技大学学报)[J], 2013, 35 (6):763
    [7] Xiulin Zheng. International Journal of Fatigue [J], 2001, 23:751
    [8] A.M. Tucker, M.B. Henderson, A.J. Wilkinson et al. Sci.Technol[J]. 2002, 18: 349
    [9] R. Jiang, S. Everitt, M.Lewandowski, et al. International Journal of Fatigue[J], 2014, 62: 217
    [10] Zhihong Zhong, Yuefeng Gu, Yong Yuan, et al. Materials Science and Engineering A[J], 2012, 552: 464
    [11] Wang Minqing(王民庆), Qu Jinglong(曲敬龙), Yin Tiezhi(殷铁志), et al. Journal of Iron and Steel Research(钢铁研究学报)[J], 2010, 22(9):28
    [12] Li Xiao(李晓), Dong Jianxin(董建新), Zhang Lina(张丽娜), et al. Acta Metallurgica Sinca(金属学报)[J], 2001, 37(10): 1059-1063
    [13]Yang Jian(杨健), Dong Jianxin(董建新), Zhang Maicang(张麦仓). Acta Metallurgica Sinca(金属学报)[J], 2013, 49 (11):71-80
    [14] H.T. Pang, P.A.S Reed. International Journal of Fatigue[J], 2008, 30:2009.
    Cited by
    Comments
    Comments
    分享到微博
    Submit
Get Citation

[Nai Qiliang, Dong Jianxin, Zhang Maicang, Zheng Lei, Yao Zhihao, Qu Jinglong. Temperature Sensitivity of Fatigue Crack Growth Rate for GH4720Li Alloy[J]. Rare Metal Materials and Engineering,2017,46(10):2915~2921.]
DOI:[doi]

Copy
Article Metrics
  • Abstract:1733
  • PDF: 2138
  • HTML: 178
  • Cited by: 0
History
  • Received:June 14,2015
  • Revised:February 02,2016
  • Adopted:February 24,2016
  • Online: December 01,2017