Abstract:High temperature deformation behavior of BFe10-1-2 cupronickel alloy under compression in the temperature range of 1023~1273K and strain rate range of 0.001~10s-1 were investigated for the sake of acquiring the optimum hot deformation processing parameters. The high temperature deformation behavior of BFe10-1-2 cupronickel alloy was characterized based on the analysis of the flow stress, kinetics and processing map. The activation energy for deformation obtained during high temperature compression of BFe10-1-2 cupronickel alloy was 425.299KJ/mol. A constitutive equation was then developed to describe the flow stress as a function of Zener-Holloman parameter and true strain. By comparing the calculated flow stress and the measured flow stress, the validity of the constitutive equation was verified. The results showed that the flow stress values obtained from the constitutive equation could track the experimental results. Thereafter, the processing map based on dynamic materials model was established, and the validation of processing map was investigated from the macro appearance and microstructure of compressed BFe10-1-2 cupronickel alloy.