Research and Prospect of Laser Cladding Technology on Titanium Alloy Surface

doi:10.12442/j.issn.1002-185X.20210447

Home > Archive>Volume 51, Issue 4, 2022 >1514-1524. DOI:10.12442/j.issn.1002-185X.20210447

Research and Prospect of Laser Cladding Technology on Titanium Alloy Surface
DOI:
                        10.12442/j.issn.1002-185X.20210447
                    
Author:
                        Xie FaQin1Xie FaQin
School of Civil Aviation,Northwestern Polytechnical University,Xi’an
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
He Peng1He Peng
School of Civil Aviation,Northwestern Polytechnical University,Xi’an
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Wu Xiangqing1Wu Xiangqing
School of Civil Aviation,Northwestern Polytechnical University,Xi’an
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Liang Minghui1Liang Minghui
School of Civil Aviation,Northwestern Polytechnical University,Xi’an
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Wang Shaoqing1Wang Shaoqing
School of Civil Aviation,Northwestern Polytechnical University,Xi’an
Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Li Zheng2Li Zheng

Find this author on All Journals
Find this author on BaiDu
Search for this author on this site
Zhou Kai3Zhou Kai

Find this author on All Journals
Find this author on BaiDu
Search for this author on this site

                    
Affiliation:School of Civil Aviation,Northwestern Polytechnical University,Xi’an
Clc Number:
Fund Project:

Article

Figures

Metrics

Reference [75]

Related [20]

Cited by

Materials

Comments

Abstract:

Based on laser cladding technology of titanium alloy surface, the research progress of functional coatings with good wear resistance, corrosion resistance, high temperature oxidation resistance and biological activity is reviewed. And analyzes the law of material selection and strengthening mechanism of cladding layer. The advantages and necessity of laser cladding biomimetic coupling unit and multifunctional coating are discussed. Aiming at the causes of major defects such as cracks and pores in the cladding layer, improvement measures such as preheating the substrate, post-treatment, adjusting process parameters and preparing gradient coatings are proposed. Meanwhile, the future application and development trend of laser cladding technology on titanium alloy surface are prospected in order to promote the innovation and development of this surface coating technology and provide new ideas for the preparation of high quality, high efficiency and low cost new cladding coating.

Key words:titanium alloy; laser cladding; bionic coating;echanical property

Reference

[1] Luo Jiao(罗皎), Li Miaoquan(李淼泉),Yu Weixin(于卫信).Rare Metal Materials and Engineering[J], 2010, 39(8): 1323

[2] Liang Fanghui (梁芳慧),Zhou Lian (周廉). Rare Metal Materials and Engineering [J], 2003, 32(4): 241

[3] Zhou Lian (周廉). Rare Metal Materials and Engineering[J],2003,(8):577

[4] Zhu Kangping (朱康平),Zhu Jianwen (祝建雯),Qu Henglei (曲恒磊). Rare Metal Materials and Engineering[J],2012,41(11):2058

[5] Jiang P, He X L, Li X X, et al.Surface and Coatings Technology[J], 2000, 130(1): 24

[6] Ewald A, Glückermann S, Thull R, et al. Biomedical engineering online[J], 2006, 5(1): 1

[7] Nouari M, Ginting A. Surface and Coatings Technology[J], 2006, 200(18-19): 5663

[8] Zhou H, Li F, He B, et al. Surface and Coatings Technology[J], 2007, 201(16-17): 7360

[9] Wang Yanfeng (王彦峰),Li Zhengxian (李争显),Du Jihong(杜继红)et al. Rare Metal Materials and Engineering[J],2019,48(6):1878

[10] Feng Xingguo (冯兴国),Zhang Kaifeng(张凯锋), Zhou Hui (周晖) et al. Rare Metal Materials and Engineering[J].2019,48(5):1447

[11] Wang Xian (王先),Yu Sirong (于思荣), Zhao Yan (赵严) et al. Rare Metal Materials and Engineering[J],2020,49(1):116

[12] Li fuquan(李福泉),Gao Zhenzeng(高振增),Li Liqun(李俐群) at al. Rare Metal Materials and Engineering[J],2017,46(1):177

[13] Vilar R. Journal of laser applications[J], 1999, 11(2): 64

[14] Zhong M, Liu W. Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science[J], 2010, 224(5): 1041

[15] Poondla N, Srivatsan T, Patnaik A, et al. Journal of Alloys and Compounds[J], 2009, 486(1-2): 162

[16] Xiang K, Chen L, Chai L, et al. Applied Surface Science[J], 2020, 517: 146214

[17] Sui X, Lu J, Zhang X, et al. Journal of Thermal Spray Technology[J], 2020, 29(7): 1838

[18] Ali A, Reda S, Hussein A, et al. Materials[J], 2017, 10(10): 1178

[19] Ke J, Liu X, Wang M, et al. Journal of Materials Research and Technology[J], 2020, 9(3): 6397

[20] Stratakis E, Bonse J, Heitz J, et al. Materials Science and Engineering: R: Reports[J], 2020, 141: 100562

[21] Zhou H, Zhang P, Sun N, et al. Applied surface science[J], 2010, 256(21): 6413

[22] Liu J, Wu L, Song M, et al. Fatigue Fracture of Engineering Materials Structures[J], 2020, 43(11): 2756

[23] Wu M, Zhan X, Bu H, et al. Metals and Materials International[J], 2020: 1

[24] Lv Xianghong(吕祥鸿),Shu Ying(舒滢),Zhao Guoxian(谢俊峰) at al. Rare Metal Materials and Engineering[J],2014,43(6):1518

[25] Han G, Zhang Y. Journal of Engineering Materials and TechnoloTechnology[J], 2020, 143(1):1

[26] Adesina O, Obadele B, Farotade G, et al. Journal of Alloys and Compounds[J], 2020, 827: 154245

[27] Hu L, Li J, Lv Y, et al. Rare Metals[J], 2020, 39(4): 436

[28] Feng Y, Feng K, Yao C, et al. Metallurgical and Materials Transactions A[J], 2019, 50(7): 3414

[29] Feng Y, Feng K, Yao C, et al. Materials Design[J], 2019, 181: 107959

[30] Aghili S, Shamanian M, Najafabadi R,et al. Ceramics International[J], 2020, 46(2): 1668

[31] Durdu S, Deniz ?, Kutbay I, et al. Journal of Alloys and Compounds[J], 2013, 551: 422

[32] Jurczyk K, Niespodziana K, Jurczyk M, et al. Materials Design[J], 2011, 32(5): 2554

[33] Zheng M, Fan D, Li X, et al. Journal of alloys and compounds[J], 2010, 489(1): 211

[34] Li H, Wang D, Chen C, et al. Colloids and Surfaces B: Biointerfaces[J], 2015, 127: 15

[35] Liu X, Ding C, Chu P K. Biomaterials[J], 2004, 25(10): 1755

[36] Chen T, Li W, Liu D, et al. Ceramics International[J], 2021, 47(1): 755

[37] Meng Q, Geng L, Ni D. Materials letters[J], 2005, 59(22): 2774

[38] Zhang Y, Li J, Jiang Y, et al. Materials Research Express[J], 2020, 7(1): 016587

[39] Li Y, Su K, Bai P, et al. Metals and Materials International[J], 2019, 25(5): 1366

[40] Li Y, Yu Z, Yun J, et al. Surface and Coatings Technology[J], 2020, 392: 125697

[41] Carrullo J, Falcón J, Borrás V. Surface and Coatings Technology[J], 2019, 358: 114

[42] Wu H, Liang L, Lan X, et al. Applied Surface Science[J], 2020, 507: 145104

[43] Kuo T, Chien C, Liu C, et al. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine[J], 2019, 233(2): 157

[44] Zhang S, Liu Q, Li L, et al. Materials Science and Engineering: C[J], 2018, 93: 1027

[45] Farahmand P, Liu S, Zhang Z, et al. Ceramics International[J], 2014, 40(10): 15421

[46] Zhang Shuangyin(张霜银),Lin Xin(林鑫),Chen Jing(陈静),Huang Weidong(黄卫东). Rare Metal Materials and Engineering[J],2009,38(5):774

[47] Tao Y, Li J, Lv Y, et al. Optics Laser Technology[J], 2017, 97: 379

[48] Chen Y, Wu D, Ma G, et al. Surface and Coatings Technology[J], 2013, 228: S452

[49] Fu Q, Liu Q, Li L, et al. Journal of Applied Biomaterials Functional Materials[J], 2020, 18: 2280800020917322

[50] Wang K, Du D, Liu G, et al. Science and Technology of Welding and Joining[J], 2019, 24(5): 517

[51] Liu X, Yu R. Materials Chemistry and Physics[J], 2007, 101(2-3): 448

[52] Liang J, Yin X, Lin Z, et al. Surface and Coatings Technology[J], 2020, 403: 126409

[53] Weng F, Yu H, Chen C, et al. Materials and Manufacturing Processes[J], 2016, 31(11): 1461

[54] Ye F , Shao W , Ye X , et al. Journal of Chemistry[J], 2020, 2020(8):1

[55] Shu D, Dai S, Wang G, et al. Journal of Materials Research and Technology[J], 2020, 9(5): 11111

[56] Zhang T, Zhuang H, Zhang Q, et al. Ceramics International[J], 2020, 46(9): 13711

[57] Weng F, Yu H, Chen C, et al. Journal of Alloys and Compounds[J], 2015, 650: 178

[58] Geng Y, McCarthy é, Brabazon D, et al. Surface and Coatings Technology[J], 2020, 398: 126085

[59] Liang J, Yin X, Lin Z, et al. Vacuum[J], 2020, 176: 109305

[60] Fu Q, Liu Q, Li L, et al. Journal of Biomedical Materials Research Part B: Applied Biomaterials[J], 2020, 108(5): 2099

[61] Zhao Y, Lu M, Fan Z, et al. Applied Surface Science[J], 2020, 531: 147212

[62] Xu M, Tang J, Ye N, et al. Materials Research Express[J], 2020, 6(12): 1265k2

[63] Zhao Y, Guan C, Chen L, et al. Optik[J], 2020, 223: 165447

[64] Liu Y, Wang G, Zeng D. Modelling and Simulation in Materials Science and Engineering[J], 2020, 28(6): 065004

[65] Mahamood R, Akinlabi E, Shukla M, et al. Materials design[J], 2013, 50: 656

[66] Sui X, Lu J, Hu J, et al. Optics Laser Technology[J], 2020, 131: 106428

[67] Zhao Ning(赵宁),Tao Li(陶礼),Hu Yunlong(胡云龙). Rare Metal Materials and Engineering[J],2017,46(8):2092

[68] Zang C, Zhou T, Zhou H, et al. Optics Laser Technology[J], 2018, 106: 299

[69] Wirth F, Wegener K. Additive Manufacturing[J], 2018, 22: 307

[70] Kochergina T, Aleshkina S, Khudyakov M, et al. Quantum Electronics[J], 2018, 48(8): 733

[71] Yi X, Sun K, Sun B, et al. Materials Characterization[J], 2020, 168: 110534

[72] Yu X, Lin G, Zhang Z, et al. Journal of Alloys and Compounds[J], 2020, 843: 155916

[73] Bahiraei M, Mazaheri Y, Sheikhi M, et al. Journal of Alloys and Compounds[J], 2020, 834: 155080

[74] Wang Y, Li C, Jiang F, et al. Materials Research Express[J], 2019, 6(10): 106563

[75] Zhang N, Liu W, Deng D, et al. Optics Laser Technology[J], 2018, 108: 247

Get Citation

[Xie FaQin, He Peng, Wu Xiangqing, Liang Minghui, Wang Shaoqing, Li Zheng, Zhou Kai. Research and Prospect of Laser Cladding Technology on Titanium Alloy Surface[J]. Rare Metal Materials and Engineering,2022,51(4):1514~1524.]
DOI：10.12442/j. issn.1002-185X.20210447

Copy

Article Metrics

Abstract:919
PDF: 1945
HTML: 133
Cited by: 0

History

Received:May 19,2021
Revised:July 08,2021
Adopted:July 12,2021
Online: May 05,2022
Published: April 28,2022

Home

Introduction

Editorial Board

Submission Guideline

Contact Us

中文

Get Citation

Article Metrics

History