+Advanced Search
Study on Ti/Al solid - solid phase in situ reaction process
Author:
Affiliation:

1.AVIC Manufacturing Technology Institute;2.University of Science and Technology

Clc Number:

TG306

Fund Project:

The National Natural Science Foundation of China

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Ti/Al metal layered composites were prepared by ultrasonic consolidation test. The microstructure of the material was observed by optical microscope The laminar composites containing different volume fraction were prepared by hot pressing reaction. The phase composition of the reaction products was determined by EDS. Through SEM measurement of Al3Ti thickness between layers, to establish the relationship between the Al3Ti concentration and reaction time. The study shows that the intermetallic compound Al3Ti is the only product in the process of in situ reaction of Ti/Al layered composites when the Al is not completely reacted. At the initial stage of in situ reaction, the accumulation of the reaction products is slow. As the reaction time goes on, the reaction products increase and the growth rate of the reaction products increases gradually.The relationship between the reaction product and the reaction time is a power exponential function.

    Reference
    Related
    Cited by
Get Citation

[hanyujie, jingbo, wangyaoqi,张艳苓,houhongliang. Study on Ti/Al solid - solid phase in situ reaction process[J]. Rare Metal Materials and Engineering,2020,49(3):921~926.]
DOI:10.12442/j. issn.1002-185X.17Ti2019138

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:January 25,2019
  • Revised:July 18,2019
  • Adopted:July 30,2019
  • Online: April 08,2020
  • Published: