+Advanced Search
Effect of High-pressure Torsion on Microstructure and Properties of TA15 Titanium Alloy
Author:
Affiliation:

Hefei University of Technology

Clc Number:

TG379

Fund Project:

The National Natural Science Foundation of China(51175137,51575153)

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    TA15 samples with different turning numbers were prepared by high-pressure torsion process. Using metallographic observation, X - ray diffraction analysis and microhardness test, the effects of high-pressure torsion on the microstructure and properties of TA15 titanium alloy were analyzed. The experimental results show that the microstructures of the specimens are not evenly distributed in the radial direction after deformation. With the increase of turning numbers, the coarse primary equiaxed α phase gradually decreases and the grain refinement effect is obvious. And the material appears preferential orientation in the (200) crystal. After the high-pressure torsional deformation, the size of the sub-crystal decreases, while the microstrain and dislocation density increase significantly. In addition, the microhardness of the deformed specimens increases remarkably. Moreover, the hardness increases with the number of torsion turns increasing. When the number of twists turns is greater than 4, the microhardness tends to a saturation value.

    Reference
    Related
    Cited by
Get Citation

[Xue Kemin, Sun Jianhui, Ji Xiaohu, Guo Weiwei, Li Ping. Effect of High-pressure Torsion on Microstructure and Properties of TA15 Titanium Alloy[J]. Rare Metal Materials and Engineering,2019,48(4):1189~1194.]
DOI:10.12442/j. issn.1002-185X.20170776

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:August 29,2017
  • Revised:October 24,2017
  • Adopted:November 09,2017
  • Online: May 13,2019
  • Published: