+Advanced Search
Preparation of Titanium by SOM Electrolytic Process from Ultrafine High Titanium Slag
Author:
Affiliation:

College of Material and Metallurgy,University

Clc Number:

TG146.4

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    In order to recycle the ultrafine high titanium slag produced in TiCl4 production process, the titanium slag was sintered and employed as the cathode in a Solid Oxide Membrane (SOM) electrolytic process in molten CaCl2 to prepare metal Ti. The deoxidization process of the cathode and the behavior of impurities removing were studied at an electrolytic temperature of 1150 ℃with an electrolytic voltage of 3.5 V. Results showed with the increasing of electrolytic time, the size and porosity of cathode was decreased while the particle size in cathode was increased, and after 6 hours electrolyzing metal titanium was obtained which indicated the SOM process offered a high current efficiency. The deoxidization process of this electrolysis process was carried out as: TiO2→CaTiO3 →Ca(Ti2O4) → TiO→ Ti. Results also indicated the impurities which included Al, Mn, Fe, and Si were mostly reduced to corresponding elementary substance, which were moved into melting CaCl2. A small amount of residual impurities in cathode can be removed by washing with dilute hydrochloric acid.

    Reference
    Related
    Cited by
Get Citation

[Shen Yuanyuan, Chen Chaoyi, LI Jun-qi, Lan Yuan-pei. Preparation of Titanium by SOM Electrolytic Process from Ultrafine High Titanium Slag[J]. Rare Metal Materials and Engineering,2019,48(5):1671~1676.]
DOI:10.12442/j. issn.1002-185X.20171023

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:November 11,2017
  • Revised:November 30,2017
  • Adopted:December 18,2017
  • Online: June 04,2019
  • Published: