+Advanced Search
Preparation of MoNbTaW Refractory High-Entropy Alloys by Spark Plasma Sintering
Author:
Affiliation:

1.School of Materials Science and Engineering,Lanzhou University of Technology;2.State Key Laboratory of Solid Lubrication,Lanzhou Institute of Chemical Physics,Chinese Academy of Sciences

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The MoNbTaW refractory high-entropy alloys were prepared by spark plasma sintering using pure metal powders as raw materials. The effects of technological parameters on the phase, crystal structure, sintering behavior and mechanical properties of MoNbTaW refractory high-entropy alloys were studied. The results show that the single-phase BCC high-entropy alloy can be formed at the sintering temperature of 1800 °C with the holding time of 5 min. The sintering temperature is the most important factor that affects the density, grain size and mechanical properties of the MoNbTaW refractory high-entropy alloy. When the sintering temperature is 2000 °C, the density of the alloy is 99.8 %, and the yield strength is 1314±14 MPa, the fracture toughness is (5~6)MPa.m1/2. The MoNbTaW refractory high-entropy alloy prepared by spark plasma sintering process have no chemical composition segregation and is a brittle material with the fracture mode of cleavage fracture.

    Reference
    Related
    Cited by
Get Citation

[Han Jiesheng, Wu Youzhi, Meng Junhu, Zhang Aiju, Su Bo. Preparation of MoNbTaW Refractory High-Entropy Alloys by Spark Plasma Sintering[J]. Rare Metal Materials and Engineering,2019,48(6):2020~2026.]
DOI:10.12442/j. issn.1002-185X.20171166

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:December 16,2017
  • Revised:January 15,2018
  • Adopted:February 09,2018
  • Online: July 30,2019
  • Published: