+Advanced Search
Properties and Characterization of Fine Ti-6Al-4V Alloy Powders Prepared by Electrode Induction melting Gas Atomization (EIGA) Technique
Author:
Affiliation:

National Engineering Research Center of Near-Net-Shape Forming for Metallic Material

Clc Number:

TG144

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    Ti-6Al-4V alloy powders were prepared by a self-developed electrode induction melting gas atomization (EIGA) equipment. Two kinds of gas atomizing nozzles, ring-hole type and ring-slit type, were used in the experiment. Different atomization pressure and power input were used. Four sets of processing parameters were designed and their effect on the powder properties was studied. The powder were sieved by 270 standard mesh (powder particle size ≤53μm) and analyst the size distribution by using MASTERSIZE 2000 Laser Particle Size Analyzer. The powder particle shape was quantified with Occhio 500NanoXY+HR Particle Size and Shape Analyzer. Results showed that optimal results were achieved with good sphericity by the combination of ring-slit nozzle with atomization pressure of 5 MPa and smelting power of 25 kW. A normal distribution of powder size was attained and the D10, D50 and D90 were 19.4μm, 31.9μm and 51.5μm, respectively. The mean Circularity and Occhio bluntness were 90.6% and 92.7%, respectively. It was found that more than 80% of powders have Occhio outgrow of 0. Further analysis of the powder by XRD, SEM, EDS and oxygen and nitrogen analyzer were carried out. The microstructure of the powder was acicular α′ martensite with random orientations. The amount of hollow powder is extremely small. The powder composition is practically same as the ingot with a low oxygen content, which satisfies the requirements of the SLM process. The Ti-6Al-4V powder achieved by optimal process was used for Selective Laser Melting and the relative density, surface roughness and microhardness are 99.02% and 4.89 μm, and 352.5 HV0.5 respectively.

    Reference
    Related
    Cited by
Get Citation

[Huang Chuan-shou, Liu Zhong-qiang, Wu Yuan-biao, Wen Li-ping, Chen Jin, Xiao Zhi-yu. Properties and Characterization of Fine Ti-6Al-4V Alloy Powders Prepared by Electrode Induction melting Gas Atomization (EIGA) Technique[J]. Rare Metal Materials and Engineering,2019,48(10):3302~3308.]
DOI:10.12442/j. issn.1002-185X.20180592

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:June 05,2018
  • Revised:July 17,2018
  • Adopted:July 27,2018
  • Online: November 01,2019
  • Published: