+Advanced Search
Effect of Milling Time on Preparation of NbMoTaW High Entropy Alloy Powder by Mechanical Alloying
Author:
Affiliation:

lujunzhuangjiabingxueyuan

Clc Number:

TG146.4

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    NbMoTaW high entropy alloy powders were prepared by mechanical alloying. The effects of milling time on the powder phase structure, microstructure, impurity content and particle size were studied. X-ray diffraction, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) were used to analyze the phase and morphology of the high-entropy alloy powder. The element distribution and impurity content in the powder were quantitatively analyzed by the energy spectrum analyzer. The particle size distribution of the powder was measured by the laser particle size distribution tester. The results show that themixed powder undergoes three stages with milling time increasing: flattening, cold welding breakage, and sphericity.After 45 h ball milling, the powder formed a single BCC solid solution. The powder morphology changes from an initial irregular shape to a sheet shape, and then it changes into an ellipsoidal shape, and the sphericity is gradually optimized. The impurities mainly originate from the agate jar and the grinding ball. Different ball milling time periods have different impurity content growth rates. Particle size changes with milling time, showing a trend of increasing first and then decreasing, and the particle size distribution is more uniform.

    Reference
    Related
    Cited by
Get Citation

[qipeibu, liangxiubing, tongyonggang, chenyongxiong, zhangzhibin. Effect of Milling Time on Preparation of NbMoTaW High Entropy Alloy Powder by Mechanical Alloying[J]. Rare Metal Materials and Engineering,2019,48(8):2623~2629.]
DOI:10.12442/j. issn.1002-185X.20180616

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:June 12,2018
  • Revised:July 13,2018
  • Adopted:August 30,2018
  • Online: September 05,2019
  • Published: