+Advanced Search
The dynamic softening behavior of coarse-grained Ti40 alloy during superplastic deformation
Author:
Affiliation:

1.School of Materials Science and Engineering,Chang’an University,Xi’an;2.State Key Laboratory of Solidification Processing,Northwestern Polytechnical University,Xi’an

Clc Number:

Fund Project:

The National Natural Science Foundation of China (51504037),

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The dynamic softening behavior of coarse-grained Ti40 alloy during superplastic deformation was studied by means of tensile tests as well as TEM observation and EBSD analysis. The results show that coarse-grained Ti40 alloy exhibits good superplasticity in most test condition and the maximum elongation 436% was obtained at the condition of 840oC, 1×10-3s-1. The deformation conditions can be divided into three areas: none superplasticity area, dynamic recovery area and dynamic recrystallization area based on the Zener-Hollomon factor and elongation combined with the microstructure analysis. The critical strain model and dislocation density evolution model of dynamic recrystallization were established based on Sellars model and KM equation respectively. The dynamic recovery mechanism is dominated by dislocation motion—dislocation cells—polygonization—subgrain formation, while the recrystallization mechanism is mainly the continous dynamic recrystallization resulting from the subgrains rotation leading to the formation of high-angle grain boundaries.

    Reference
    Related
    Cited by
Get Citation

[Xuemin Zhang, Weidong Zeng, Yue Li, Yuxia Cao, Mengyan Liang, Yajie Guo. The dynamic softening behavior of coarse-grained Ti40 alloy during superplastic deformation[J]. Rare Metal Materials and Engineering,2019,48(10):3202~3208.]
DOI:10.12442/j. issn.1002-185X.20180632

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:June 19,2018
  • Revised:July 27,2018
  • Adopted:August 31,2018
  • Online: November 01,2019
  • Published: