+Advanced Search
Study on High Temperature Behavior of Tungsten-Based Powder Alloy Joints Brazed with CuAgNi Solder
Author:
Affiliation:

1.material science and Engineering School,Jilin University;2.Northwest Institute for Nonferrous Metal Research

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The microstructure of CuAgNi filler metals and Tungsten-based powder alloy brazing joints has been observed by OM, SEM and XRD, to compare and analyze the high temperature shear strength of tungsten based powder alloy joints brazed with CuAg and CuAgNi filler metals, and the thermal fatigue properties of the brazed joints of CuAgNi brazed filler metal are further analyzed. It is investigated that Ni has promoted the shear strength of brazed joints at room temperature and high temperature. When the temperature is close to room temperature, the shear strength of the brazed joint is 214.7 MPa, which is 32.37% higher than that without Ni. At 400 °C, the shear strength is 121.9 MPa, which is 91.67% higher than that without Ni. Moreover, when the temperature is beyond 300 ° C, the oxidation of the bonding interface causes the bonding strength of the joint to drastically decrease. In the thermal fatigue test, as the number of thermal cycles increase, the cracks gradually expand after the initiation of α-Ag and β-Cu bonding, which gradually reduces the shear strength of the joint.

    Reference
    Related
    Cited by
Get Citation

[LuYuzhen, ShangQinghui, QiuXiaoming, LuoCui, XingFei. Study on High Temperature Behavior of Tungsten-Based Powder Alloy Joints Brazed with CuAgNi Solder[J]. Rare Metal Materials and Engineering,2019,48(8):2635~2639.]
DOI:10.12442/j. issn.1002-185X.20180794

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:July 23,2018
  • Revised:August 10,2018
  • Adopted:October 08,2018
  • Online: September 05,2019
  • Published: