+Advanced Search
Microstructure and mechanical properties of Ti?45Al?8Nb alloy sintered at different SPS temperatures
Author:
Affiliation:

1.School of Mechanical Engineering,Quzhou University;2.Engineering College,Lishui University

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    In this paper, TiAl alloys with a nominal composition of Ti-45Al-8Nb (at.%) were prepared by spark plasma sintering (SPS) process. The effect of sintering temperatures on microstructure and mechanical properties of Ti-45Al-8Nb alloy has been studied. The results show that the microstructures of Ti-45Al-8Nb alloy sintered at different temperatures all exhibit full lamellae structure. With the increasing of sintered temperature, the amount of γ phase in the alloy increases and α<sub>2</sub> phase decreases. There is no B2 Phase when sintered at 1250℃. As the sintering temperature increases, the B2 phase precipitates at the grain boundary and the amount of B2 phase increases. The main reason is that the alloy may melt at local areas with the increasing of sintering temperature; the β phase would order to B2 phase at high cooling rates. The tensile strength and compression ratio decreases with the sintering temperature increasing from 1250℃ to 1300℃. The maximum tensile strength and compression ratio reached 2084.20MPa and 33.10% at 1250℃ respectively.

    Reference
    Related
    Cited by
Get Citation

[Dong duo, Su Yongjun, Zhu Dongdong, Zhou Zhaozhong, Ni Chengyuan, He Qing, Wei Zunjie. Microstructure and mechanical properties of Ti?45Al?8Nb alloy sintered at different SPS temperatures[J]. Rare Metal Materials and Engineering,2019,48(12):4101~4105.]
DOI:10.12442/j. issn.1002-185X.20180861

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:August 12,2018
  • Revised:September 06,2018
  • Adopted:October 09,2018
  • Online: January 07,2020
  • Published: