+Advanced Search
Microstructure and properties of high-pressure die casting Mg/Al dissimilar friction stir welded joints
Author:
Affiliation:

College of Materials Science and Engineering,Chongqing University

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The high-pressure die castings of AZ91 Mg and ADC12 Al alloys of 3 mm were welded by frciton stir welding. OM、SEM/EDS、XRD and universal tensile testing machine were used to analyze the microstructure and tensile property of the joint. The main conclusins are: 1). Defect-free welded joints were obtained when ADC12 die-casting aluminum alloy was placed in advancing side with a welding speed of 40mm/min and the rotational speeds of 900-1300r/min. 2). Mg and Al alloys are mixed with each other in the nugget zone, and mechanical interlocking occurs. In the parent material, the thick and large casting dendrites are obviously refined, and the non-Mg/Al matrix phases mainly include Si, Mg2Al3, Mg17Al12 and Mg2Si. 3) The average tensile strength of the joints increased first and then decreased with the increase of rotating speed. Fracture occurred at the interface of the thermal affceted zone and the nugget zone in advancing side.

    Reference
    Related
    Cited by
Get Citation

[LI Peiqi, YOU Guoqiang, XU Xuan-xi, DING Yu-han, Wen Heng-yu, Guo Wei. Microstructure and properties of high-pressure die casting Mg/Al dissimilar friction stir welded joints[J]. Rare Metal Materials and Engineering,2019,48(5):1551~1558.]
DOI:10.12442/j. issn.1002-185X.20180981

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:September 23,2018
  • Revised:October 29,2018
  • Adopted:November 08,2018
  • Online: June 04,2019
  • Published: