+Advanced Search
Tensile properties and microstructural evolution of hot forged Ti-44Al-4Nb-4V-0.3Mo-Y alloy with equiaxed and lamellar microstructure during high temperature tension
Author:
Affiliation:

Clc Number:

Fund Project:

Nation Natural Science Foundation of China (No.51604191, 51504153, 51604159),the Natural Science Foundation for Young Scientists of Shanxi Province, China (No. 201701D221075),the Special/Youth Foundation of Taiyuan University of Technology (No. 2015QN014)

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The equiaxed γ grains and α2/γ laminas are the two main deformed microstructure of beta-gamma TiAl alloy. In this paper, mechanical properties and microstructural evolution of hot forged Ti-44Al-4Nb-4V-0.3Mo-Y alloy with equiaxed and lamellar microstructure were studied during high temperature tension. The results show that tensile temperature has a significant effect on the mechanical properties and microstructures of Ti-44Al-4Nb-4V-0.3Mo-Y alloy. At the same temperature, the tensile strength and yield strength of the TiAl alloy with equiaxed microstructure are slightly greater than those with lamellar structure,however the elongation difference is not significant. With the increase of tensile temperature, the tensile strength and yield strength of TiAl alloy decrease gradually, while the elongation increases significantly. For equiaxed microstructure, increasing tensile temperature, the equiaxed γ grains are elongated and complete dynamic recrystallization occurs to refine the microstructure of the TiAl alloy. For lamellar microstructure, the degree of decomposition of α2/γ laminas and recrystallization of γ laths increase with the increase of tensile temperature. The ductile brittle transition temperature of Ti-44Al-4Nb-4V-0.3Mo-Y alloy is between 750 ~ 800°C.

    Reference
    Related
    Cited by
Get Citation

[Xiaoping Cao, Shuling Zhang, Changjiang Zhang, Shuzhi Zhang. Tensile properties and microstructural evolution of hot forged Ti-44Al-4Nb-4V-0.3Mo-Y alloy with equiaxed and lamellar microstructure during high temperature tension[J]. Rare Metal Materials and Engineering,2020,49(7):2346~2351.]
DOI:10.12442/j. issn.1002-185X.20190421

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:May 16,2019
  • Revised:August 17,2019
  • Adopted:September 06,2019
  • Online: August 31,2020
  • Published: