+Advanced Search
Reactiveness of Low Fluorine Slag for Electroslag Remelting to Al and Ti of Incoloy 825 Alloy
Author:
Affiliation:

1.School of Metallurgical Engineering,Xian University of Architecture and Technology,Xi′an;2.State Key Laboratory of Advanced Metallurgy,University of Science and Technology Beijing

Clc Number:

TF141

Fund Project:

The National Natural Science Foundation of China (General Program, Key Program, Major Research Plan)

  • Article
  • | |
  • Metrics
  • |
  • Reference [24]
  • |
  • Related [20]
  • |
  • Cited by
  • | |
  • Comments
    Abstract:

    The effect of the content of TiO2 in CaF2-CaO-Al2O3-MgO-Li2O-(TiO2) slag on the content of Al and Ti in Incoloy 825 alloy was discussed by the high temperature slag-metal equilibrium experiment. The relationship between the activity of TiO2 and Al2O3 in slag and the compositions of slag was analyzed by FactSage 7.3 thermodynamic software. The influence rule of components in slag on Gibbs free energy of reaction 4[Al]+3(TiO2) = 3[Ti]+2(Al2O3) and the content of equilibrium Al and Ti in alloy were studied. The results show that the Gibbs free energy of the reaction is negatively correlated with TiO2, CaF2 and MgO in the slag, and positively correlated with CaO and Al2O3. When the content of TiO2 in slag is 0-7.27%, the effect of burning Ti to increase Al is gradually reduced. When the content of TiO2 is 11.27%, the effect of burning Al to increase Ti is appeared. At the same temperature, with the increase of CaO and Al2O3 content in slag, the equilibrium Ti content in alloy decreases and the equilibrium Al content increases. With the increase of TiO2 content in slag, the equilibrium Ti content in alloy increases and the equilibrium Al content decreases. The change of CaF2 and MgO content in slag has little effect on the equilibrium Al and Ti content in the alloy. The experimental results are in good agreement with the thermodynamic calculation results.

    Reference
    [1]Sun Nan(孙楠),Wen chen(温宸), Liu zili(刘子利) et al. Rare Metal Materials and Engineering(稀有金属材料与工程)[J],2018,47(3):860
    [2]Chen Shuaichao(陈帅超),Wang Xinpeng(王新鹏),Ning Tianxin(宁天信) et al. Special Steel(特殊钢)[J],2017,38(6): 49
    [3]Hou Dong(侯栋),Dong Yanwu(董艳伍),Jiang Zhouhua(姜周华) et al. Journal of Northeastern University(东北大学学报)[J]., 2015, 36(11): 1591
    [4]Chen Chongxi(陈崇喜),Wang Yong(王涌),Fu Jie(傅杰) et al. Acta Metallurgica Sinica(金属学报)[J],1981,17(1):50.
    [5]Yang J G, Park J H. Metallurgical and Materials Transactions B[J],2017,48(4):2147
    [6]Xue Zhengxue(薛正学),Zheng Yaxu(郑亚旭),Jiang Fang(姜方) et al. Special Steel(特殊钢) [J],2016,37(04):37
    [7]Shi Shuai(师帅),Geng Xin(耿鑫),Jiang Zhouhua(姜周华) et al. Chinese Journal of Engineering(工程科学学报)[J],2018,40(S1):47
    [8]Shi Chengbin,Zheng Dingli,Shin Seungho et al. International Journal of Minerals Metallurgy and Materials[J], 2017,24(01):18
    [9]Pateisky G,Biele H,Fleischer H J. Journal of Vacuum Science Technology[J],1972,9(6):1318
    [10]Hou D,Jiang Z H,Dong Y W et al. Ironmaking Steelmaking[J],2016,43(7):1
    [11]Duan S C,Shi X,Mao M T et al. Scientific Reports[J],2018,8(1):5232.
    [12]Zaitsev A I,Leites A V,Lrtvina A D et al. Steel Research[J],1994,65(9):368
    [13]Shimizu K, Cramb A W High Temperature Materials and Processes[J],2004,22(5):237
    [14]Ju Jiantao(巨建涛),Lv Zhenlin(吕振林),Jiang Zhiyuan(焦志远) et al. The Chinese Journal of Process Engineering(过程工程学报)[J],2012,12(4):618
    [15]Shi C B, Shin S H, Zheng D L et al. Metallurgical and Materials Transactions B[J],2016,47(6):3343
    [16]Duan S C, Shi X, Wang F et al. Journal of Materials Research and Technology[J],2019,8(3).2508
    [17]Li S J, Cheng G G, Miao Z Q et al. ISIJ International[J],2017,57(12):2148
    [18]Wang Jun(王珺),Li Guangqiang(李光强),Yang Xueping(杨雪萍) et al. Journal of Iron and Steel Research(钢铁研究学报)[J],2015,27(06):18
    [19]Shi C B, Cho J W, Zheng D L et al. International Journal of Minerals Metallurgy and Materials[J],2016,23(6):627
    [20]Dou Zhihe(豆志河),Zhang Yanan(张延安),Yao Janming(姚建明) et al. The Chinese Journal of Process Engineering(过程工程学报)[J],2009,9(S1):246
    [21]Duan Shengchao(段生朝),Guo hanjie(郭汉杰),Shi Xiao(石骁) et al. Chinese Journal of Engineering(工程科学学报)[J],2018, 40(S1):53
    [22]Karasev A, Suito H. Metallurgical and Materials Transactions B[J],1999,30(2):259
    [23]Pak J J, Jeong Y S, Tae S J et al. Metallurgical and Materials Transactions B[J],2005,36(4):489
    [24]Hou D, Jiang Z, Dong Y, et al. Metallurgical and Materials Transactions B [J],2016,47(2):1465
    Cited by
Get Citation

[Ju Jiantao, An Jialiang, Shi Chengbin, Zheng Dingli, Ji Guangheng. Reactiveness of Low Fluorine Slag for Electroslag Remelting to Al and Ti of Incoloy 825 Alloy[J]. Rare Metal Materials and Engineering,2020,49(1):233~240.]
DOI:10.12442/j. issn.1002-185X.20190539

Copy
Article Metrics
  • Abstract:806
  • PDF: 1281
  • HTML: 153
  • Cited by: 0
History
  • Received:June 26,2019
  • Revised:September 16,2019
  • Adopted:September 17,2019
  • Online: February 16,2020