+Advanced Search
The synthesize research of phases and morphology of Sm2Fe17 melt-spun ribbon
Author:
Affiliation:

College of Metallurgy and Energy,North China University of Science and Technology,Tangshan Hebei

Clc Number:

Fund Project:

the National Natural Science Foundation of China

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The effects of the quenching speed on the phase composition and morphology of the Sm-Fe alloy ribbons are measured and analyzed by X-ray diffraction (XRD), optical microscope (OM), scanning electron microscope (SEM) and transmission electron microscope (HRTEM). It was found that the size of alloy ribbons decrease along the width and thickness direction firstly with the increasing of quenching speed and maintain stability in the thickness direction even increasing the speed sequentially. The size of agglomeration also decreases in the free surface,about 0.5~3μm as the quenching speed is up to 36m/s. The XRD and EDS results show that there are three different phases in the ribbons: Sm2Fe17, α-Fe and Sm-rich phase,the main phase grain size of the ribbons is on the sub-micron scale (daver≈340nm, 36m/s), which is restricted not only by the wheel speed but also by the bare two element type. It is the first time to characterize the grain morphology by different methods.

    Reference
    Related
    Cited by
Get Citation

[Kun Liu, ShuhuanWang, Yunli Feng, Yikun Zhang. The synthesize research of phases and morphology of Sm2Fe17 melt-spun ribbon[J]. Rare Metal Materials and Engineering,2020,49(11):3796~3802.]
DOI:10.12442/j. issn.1002-185X.20190855

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:October 15,2019
  • Revised:November 05,2019
  • Adopted:November 12,2019
  • Online: December 09,2020
  • Published: