+Advanced Search
Preparation and mechanical properties of ZL205A alloy-infiltrated SiC foam ceramic composites
Author:
Affiliation:

1.School of Materials Science and Engineering,Harbin Institute of Technology;2.Beijing Aerospace Propulsion Institute

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    ZL205A alloy-infiltrated SiC foam ceramic composites are prepared through extrusion infiltration process. The effect of different porosity of SiC foam ceramic on the properties of composites is investigated. The SiC foam ceramics are tightly combined with the ZL205A matrix material, and there are few cracks and other defects can be observed. The SiC foam ceramic as the reinforcing phase refines the grains of the ZL205A matrix phase. The pore structure and the grain size are finer and smaller with decreasing of the reinforcing phase porosity. The mechanical properties of the ZL205A alloy-infiltrated SiC foam ceramic composites are investigated. The hardness and flexural strength of the composites are 127.6HV and 415MPa, respectively. The wear resistance of the composites is also investigated, the results demonstrate that the addition of ceramic reinforcing phase can effectively transform the severe adhesive wear and spalling wear of the matrix phase into lighter abrasive wear, which greatly improves the friction and wear properties of the composite.

    Reference
    Related
    Cited by
Get Citation

[Qi Yushi, Wang Yanbo, Du Lanjun, Fei Yanhan, Du Zhiming. Preparation and mechanical properties of ZL205A alloy-infiltrated SiC foam ceramic composites[J]. Rare Metal Materials and Engineering,2020,49(11):3741~3747.]
DOI:10.12442/j. issn.1002-185X.20190896

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:October 30,2019
  • Revised:December 09,2019
  • Adopted:December 11,2019
  • Online: December 09,2020
  • Published: