+Advanced Search
Microstructure characteristics and tensile strength of aluminum/stainless steel joint welded by inertia friction
Author:
Affiliation:

1.School of Materials Science and Engineering,Tsinghua University;2.Tsinghua University;3.China Iron Steel Research Institute Group;4.School of Materials Science and Engineering,Shandong University

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    IFW method has the potential of being ideal technology to weld dissimilar materials, aluminum and stainless steel were welded by inertia friction, and the morphology, microstructure, interfacial composition and mechanical properties of Al/steel joints were investigated. Results showed that a thin IMC reaction layer was found at the welding interface in the joint, and the IMC was consisted of Al, Fe and high concentration Si. The microstructure of joint contained weld nugget zone, fully dynamic recrystallized zone, thermal mechanically affected zone and heat affected zone. The grain of fully dynamic recrystallized zone (FDRZ) was below 0.1 μm, and the average width of FDRZ in the joint was about 5 μm. The maximum hardness was in the FDRZ, and the maximum value was 395.8 HV in the joint. Tensile strength of joint was influenced by the rotational speed. When the rotational speed was 1100 rpm, the joint reached to the maximum tensile strength of 323 MPa. The high tensile strength reason should be related to the thickness of IMC at the weld interface.

    Reference
    Related
    Cited by
Get Citation

[Yong Liu, Haiyan Zhao, Yun Peng, Xiaofei Ma. Microstructure characteristics and tensile strength of aluminum/stainless steel joint welded by inertia friction[J]. Rare Metal Materials and Engineering,2021,50(3):795~801.]
DOI:10.12442/j. issn.1002-185X.20200092

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:February 16,2020
  • Revised:March 18,2020
  • Adopted:March 19,2020
  • Online: April 02,2021
  • Published: