+Advanced Search
Effect of low-melt alloy powder on brazing process of flux-cored silver brazing filler metal
Author:
Affiliation:

State Key Laboratory of Advanced Brazing Filler Metals and Technology,Zhengzhou Research Institute of Mechanical Engineering. Zhengzhou 450001

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    To overcome AgCuZnSn filler metal with high tin content is difficult to form for its high brittleness, a composite flux-cored silver filler metal with CuSn alloy powder core was designed based on the concept of flux-cored wire. The effects of 30wt%~70wt%Cu60Sn40 alloy powder on the wettability, microstructure, interfacial microhardness and tensile strength of silver filler metal, copper/Q235 steel brazing joint were studied. The results show that AgCuZnSn filler metal with high tin content is in-situ synthesis by CuSn alloy powder in core and BAg30CuZnSn of outer layer during brazing process, and uniform composition with good joint structure was obtained. With the increase of the content of alloy powder in the core, the wetting area of composite flux-cored silver solder on copper plate and Q235 steel plate is promoted constantly, the microhardness of copper/Q235 steel brazing joint is rised continuously, and the tensile strength is increased first and then decreased. When the content of CuSn alloy powder in the powder core is 30wt%, the maximum tensile strength (198.91MPa) of Cu/Q235 steel brazing joint is obtained, which is enhanced by 23.4% compared with the core silver brazing filler metal without alloy powder added.

    Reference
    Related
    Cited by
Get Citation

[Wang Meng, Zhang Guanxing, Zhong Sujuan, Shen Yuanxun, long Weimin, Dong Hongwei, Liu Xiaofang. Effect of low-melt alloy powder on brazing process of flux-cored silver brazing filler metal[J]. Rare Metal Materials and Engineering,2021,50(8):2859~2866.]
DOI:10.12442/j. issn.1002-185X.20200646

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:August 28,2020
  • Revised:October 17,2020
  • Adopted:November 25,2020
  • Online: September 07,2021
  • Published: August 31,2021