+Advanced Search
Study on Surface Strengthening of Tungsten Plasma Facing Material by Shot Peening
Author:
Affiliation:

Xuzhou University of Technology

Clc Number:

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    The mechanical shot peening technology is applied to study the surface strengthening of tungsten plasma facing materials for fusion device. The strengthening effect of tungsten after shot peening was discussed in detail, which included micro morphology, grain refinement, surface roughness, surface hardness and surface residual compressive stress. And the shot peening process parameters were also optimized. The results indicate that it is the optimum shot peening parameters for the brittle and hard tungsten that air pressure of 0.3 MPa, ceramic pellet with the diameter of 0.4 mm and 100 mm pellet distance, which induces the performance enhancement of tungsten plasma facing material. The surface grain refinement phenomenon is obvious. The surface hardness increasement of about 53.5% is obtained, and the residual compressive stress is increased by 8.3 times. And the influence of shot peening technology on surface roughness is not obvious. The maximum roughness is about 1.5μm.

    Reference
    Related
    Cited by
Get Citation

[Ji Suyan, Chong Fali, Liao Kai, Chen Jiawei. Study on Surface Strengthening of Tungsten Plasma Facing Material by Shot Peening[J]. Rare Metal Materials and Engineering,2021,50(10):3714~3719.]
DOI:10.12442/j. issn.1002-185X.20200819

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:October 23,2020
  • Revised:November 26,2020
  • Adopted:December 23,2020
  • Online: October 28,2021
  • Published: October 25,2021