+Advanced Search
Effects of sintering process and hot extrusion on Microstructure and properties of Nano-Al2O3 / 7075 Aluminum Matrix Composites
Author:
Affiliation:

School of Materials and Science Engineering,Kunming University of Science and Technology

Clc Number:

TB333

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    10 wt% Nano-Al2O3 / 7075 aluminum matrix composites were prepared by powder metallurgy and hot extrusion. The effects of sintering temperature and extrusion ratio on microstructure, density, elastic modulus, hardness and compressive strength of the composites were studied. The results show that: with the increase of sintering temperature, the hardness of the composites with extrusion ratio of 4:1 and 8:1 increases at first and then decreases, and the overall hardness of the composites increases obviously; the compactness of the composites after extrusion is more than 98%; the compactness of the composites after extrusion is 4:1, the sintering temperature is 620 ℃, 630 ℃ When the extrusion ratio is 8:1, the compressive strength of the composite increases by 33.2%, 34.1% and 31.1%, which increases first and then decreases with temperature. In conclusion, the elastic modulus of the composites has little change.

    Reference
    Related
    Cited by
Get Citation

[Yan Qinghua, Xu Zhikai, Lu Dehong. Effects of sintering process and hot extrusion on Microstructure and properties of Nano-Al2O3 / 7075 Aluminum Matrix Composites[J]. Rare Metal Materials and Engineering,2021,50(10):3729~3738.]
DOI:10.12442/j. issn.1002-185X.20200825

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:October 26,2020
  • Revised:December 21,2020
  • Adopted:February 03,2021
  • Online: October 28,2021
  • Published: October 25,2021