+Advanced Search
Morphology of Fe element and the purification technology of silicon carbide powders
Author:
Affiliation:

Key Laboratory for Anisotropy and Texture of Materials, Ministry of Education, Northeastern University

Clc Number:

TQ174

Fund Project:

  • Article
  • |
  • Figures
  • |
  • Metrics
  • |
  • Reference
  • |
  • Related
  • |
  • Cited by
  • |
  • Materials
  • |
  • Comments
    Abstract:

    In order to explore the morphology of Fe element in silicon carbide (SiC) block and the purification technology of SiC powders. The SiC block and powders were used as the main raw materials, respectively. HCl, HNO3, H2SO4 and HF were used as pickling agents, respectively. The phase composition, microstructures and Fe element content of SiC block and powders before and after pickling were characterized by X-ray diffraction, scanning electron microscopy and ICP, respectively. The morphology of Fe element in SiC block under microscopic state and the purification technology of SiC powders were investigated. The results indicated that Fe element existed in the form of FexSiy solid solution inside the SiC block. It could be seen that Fe element wrapped by free Si in the microscopic state. When the liquid solid ratio about 5:1, the optimum purification technology were considered as follows: The concentration of HF 0.15 mol/L, pickling temperature 70 °C and leaching time 2 h, the removal rate of Fe element could reach 94.1% under this pickling technology.

    Reference
    Related
    Cited by
Get Citation

[Feng Dong, Ren Quanxing, Jiang Yan, Ru Hongqiang, Wang Wei, Zhang Cuiping, Zhao Shiwei, Qin Zhaobo. Morphology of Fe element and the purification technology of silicon carbide powders[J]. Rare Metal Materials and Engineering,2020,49(2):644~649.]
DOI:10.12442/j. issn.1002-185X. QH20190049

Copy
Article Metrics
  • Abstract:
  • PDF:
  • HTML:
  • Cited by:
History
  • Received:April 02,2019
  • Revised:April 28,2019
  • Adopted:October 23,2019
  • Online: March 12,2020
  • Published: