Multi-scale Analysis of Residual Stress in Thermomechanical Treatment Process of 7050 Aluminum Alloy Ring

Abstract:

In the process of preparing and processing aluminum alloy rings, micro residual stress is generated, while macro residual stress is also generated. The release and redistribution of macro residual stress cause the deformation of the workpiece during processing and service, which will affect its dimensional accuracy. The superposition of macro residual stress and external force reduces the strength and fatigue limit of the workpiece. Under the combined action of micro-residual stress and external force, it is easy to cause stress concentration in the micro-area, so that the workpiece produces micro-cracks under far less than the yield stress, and ultimately fractures. The most important process affecting the residual stress in aluminum alloy forgings is the quenching process after solution treatment. In this paper, the macro residual stress of 7050 aluminum alloy ring during solution-cold bulging process was detected by blind hole method, and the macro finite element simulation of 7050 aluminum alloy ring during solution-cold bulging process was carried out by ABAQUS software. The macro residual stress evolution law of 7050 aluminum alloy ring during solution-cold bulging process was analyzed. It is concluded that the introduction of appropriate cold bulging process after solution quenching can greatly reduce the macro residual stress of 7050 aluminum alloy. The cross-scale analysis of residual stress is realized by the combined application of multi-scale simulation methods: Based on the crystal plastic finite element simulation method, the micro-area of interest is determined according to the macro-finite element simulation results, and the strain history of the micro-area is extracted. The strain history is applied to the micro-polycrystal model at the corresponding position by ABAQUS software to study the distribution law of micro-residual stress and its relationship with the microstructure.