Effect of Discharge Energy on Interface Morphology of LA103Z/1060Al Dissimilar Materials in Electromagnetic Pulse Welding

Abstract:

The connections of dissimilar materials LA103Z magnesium-lithium alloy and 1060Al alloy were achieved by electromagnetic pulse welding (EMPW). The effects of discharge energy on interface morphology, wave formation mechanisms, and element diffusion were systematically investigated through numerical simulations and experiments. The results indicate that the induced magnetic field and current are determined by the welding current's magnitude and rate of change, respectively. The increase in discharge energy enhances the Lorentz force experienced by 1060Al, thereby increasing the impact velocity, while the impact angle almost remains unaffected. The rebound phenomenon, which alters the contact state between the flyer plate and the target plate, is identified as the key factor in forming the annular weld seam. Both the simulated and actual interface morphologies are sinusoidal, with the amplitude increasing from 3.02 μm at 32 kJ to 6.48 μm at 38 kJ. The wave formation is attributed to shear-induced instability and metal-plastic flow triggered by high-speed collision. No melting is observed at the interface. The maximum shear strength of the joint reaches 90.38% of that of the aluminum base material. Numerical simulations confirm that the interface temperature remains below the melting points of both base materials, which is critical for improving the mechanical performance of the joint.